Any videos of barrel removal?
are there any videos out of proper barrel removal and front bushing replacement? i got my first ss and bought a shroud and front bushing. I think i removed and put everything back right but im not sure. whether i put the power wheel at 5 or 10 it penetrates the same into the wood i shoot at. Shouldnt it go deeper at 10? thanks for any help.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
its in spanish but you can see the process
thanks for the insight, im new to this thing
If you have the DVD/VCR video that came with the rifle, there is a how-to on it.
If your rifle is firing, you probably have everything installed right.
Its not unusual to get the same power with an SS regardless of the powerwheel setting.
The maximum amount you can effectively use with the 12″ barrel is usually on the low-end of the powerwheel. Higher settings waste air as the pellet has already left the barrel and your valve is still open.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
No video, but I learned whith it, I hope help you:
http://www.leupyscustomshop.co.uk/content/gallery.php?twg_album=instructions