Installing bipod
The airforce bipod adapter is a weakling as it is held by just a C clip and it is unable to take the weight of the Condor.
What do you guys use to mount a bipod? Please advise.
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Marmot Militia just made me a Bad Ass Adapter for my Talon which slid on the bottom rail and has a swivel stud on it… Machined out of aluminum, not the cheap piece of shit swivel stud that AF sells…
I was able to mount my Harris Bipod and it is Rock Solid. I will post pictures as soon as I get a chance. Best $45 bucks I ever spent
My advice: don’t get the stock AF bipod, why? becouse it’s too light, too expensive, terrible balance adjustment !.
Take a nice bipod…
🙂
hard to get hold off the dovetail ones, i’ve got a weaver with stud mounted on a dovetail to weaver adapter but its not the best config.
pabs has the best sugestion there i think in drilling and tapping the frame for a stud, next on the long list for me i think.
Can u point me to a dovetail to swivel adapter, i guess that is wot u r talking about?
First off, get rid of that pos AF bipod.
Second, get a Harris and buy an adapter, or drill and tap in the frame for a stud.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
You can always buy one of these
http://www.pyramydair.com/s/a/UTG_11mm_to_Weaver_Adapter_Vertical_Scope_Stop_Pin/2401
Drill and tap a hole for a stud and you are good to go.
Some guys just drill a hole and screw in one of the studs that screw into a wood stock, into the aluminum.
Cheap and easy solution for those afraid to drill into their guns frame