Co2 valve (off the adapter) VS Condor high flow
I read here one member had taken the valve off of his Co2 adapter and mounted it on his talon tank. this was comparable to the condor tank.
I tried a search and came up shy. really !
Is the valve on the Co2 adapter a high flow like the Condor?
I have the Co2 adapter, but will need to get a tank, or just drop the 195$ at Pyramid air for the .22 Condor
Has anyone tested a .22 condor valve against the Co2 valve?
I am looking to try a regulated jsd tank for the Air Archer conversion and am looking to save a $ and use the Adapter I have.
Thoughts?
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
the return spring is of course much softer, the seal is shaped different, and at least on mine the o ring in the valve face is much beefier, im considering swapping it wit the one in my hpa valve.
LOL 🙄 I should have figured!
I spent the last 2 hrs reading more and more and did dig up a post about this comparison.
Figured Roachcreek would have done this 😉
http://talonairgun.com/forum/viewtopic.php?t=16814&start=0
Now what’s that part #
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
I tried a search and came up shy. really !
Is the valve on the Co2 adapter a high flow like the Condor?
I have the Co2 adapter, but will need to get a tank, or just drop the 195$ at Pyramid air for the .22 Condor
Has anyone tested a .22 condor valve against the Co2 valve?
I am looking to try a regulated jsd tank for the Air Archer conversion and am looking to save a $ and use the Adapter I have.
Thoughts?
I did a check on mine cause I have 2 co2 valves.I took both apart on my condor and the cos valve and couldn’t see any difference.
I used the co2 valve on my air archer. It works fine. I took the Tallon tank valve apart and traded the parts out and made a High flow. It worked for me.