Add Gauge To Condor Hiflo Tank
Is there an inexpensive way to add a gauge to the standard Condor 490cc tank.
Thanks
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
A little over $100 isn’t bad of I get a regulator, a fill nipple, and a gauge. Do you recommend the one from Jim then?
I have had up to three AF rifles with ETACS and gauges at one time, a Condor, a SS and a Airarcher on a Talonss frame.
I have to agree with Condor, altho it pains me to do so 😛 , and to boot, the gauges are inaccurate. I was taking the airarcher to my range yesterday and I saw that it had a 4000PSI fill, a quick check on my scba bottle verified my suspicion that it was a 3000PSI fill and the gauge was incorrect as usual.
To be 500 PSI off is normal, to be 1000 PSI off set a new record, but it is what it is and little gauges like you are suggesting are not accurate.
The ETAC canted version does give you a gauge, albiet inaccurate and a fill nipple and a angle to get your face away from the ill designed cheekweld.
Regards,
Roachcreek
Why would you need a gauge in the first place? I never had a problem knowing when to refill. Last resort, just count your shots?
Sam 😎
indeed but $100 or more isn’t ‘inexpensive’ usually AND it will add a fair bit of length to his rifle…..
eTac wouldbe the way to go for sure.
Cant you get the Etac with a gauges?
sadly, no there is not.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
http://www.Kyhistoricsalvage.com
nope, not what I said. IIRC an eTac is roughly $100 and if you want a reg then add another $75
You will indeed have to check with Jim and firm up prices.