new stock idea…need thoughts?
id like to fit a MagPul PRS stock to a condor, and i was wondering if anyone would be willing to make a tank to fit in the stock where the AR buffer tube would normally go…its a bit over an inch in dia. it would also need a fitting made so that a remote line can be used…more ideas for building this stock please!
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
If you have your buffer tube made to connect to the ETAC you could use a fill nipple like this.
My next project is to get all the fittings so I can use my big regulator off my Booster set up to connect to the Pygmee tank and do it all with just quick connect fittings , so I can trade it bact to the Booster when I want, then I have 69 cu in of 4500 air in a back pack with a long air supply hose.
The Booster of course allows me to fill that Pygmee tank in the field to 4500 PSI from a SCBA or SCUBA tank that is below 3000 PSI pressure.
I can use this set up now, but only put 3000 PSI or less in the tank. My Condor shoots best at 2500PSI tho, so with a regulator and the Pygmee I would get a lot of shots.
THis is the regulator I want to use for the Pygmee tank. You should be able to do all this with what you want, it just takes money.
Regards,
Roachcreek
its pretty much like your setup roachcreek, but w/o the tank mounted to the forearm, instead, the tanks on my back, or in a pack or something… oh- and WOK…that avatar…Good Goddamn!!!!
well, the tank that the stock goes around wouldnt be a tank in the traditional sense- its more of a pre-chamber that the valve draws from, and fed via a remote line… and i was thinking of the edge tank… you guys think that i would be able to seal off the rear of the edge tank (where the fill nipple is) and drill a hole on the side for a fill nipple? thoughts on this set up? thoughts on making it better? thanks again all!!
You need to mount a tank in front of the forearm, run a remote line to your stock mounting tube, what would be a buffer tube on a AR, and have that tube house your valve, regulator and air reservior for the regulator, then attach your Magpul stock to the tube.
To just use a Air tank the size of a buffer tube would give you very few shots.
There are M4 paint ball stocks that will mount on CO2 tanks that can be mounted on the AF rifle, but who wants a Condor on CO2?
Regards,
Roachcreek
Take a look at the tank for the edge and see if that would work
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
the setup ive got in my head is basically the top pic…so im EXTREMELY glad you posted that pic roach…and the 2nd pic…HOLY SHIT!!! is that a setup for filling tanks, guns or a bench shooting setup?! that seems like alotta plumbing! anyhoo, thanks for all the input! so how easy would it be to cut down and plug/modify an edge tank? or would it be better to make a custom tube to hook up to an Etac?? thanks all!!