Marauder Pistol Bullpup Trigger Mechanism (pics galore)
I purchased a Marauder pistol bullpup stock and trigger mechanism.
The stock is undergoing a major overhaul and I’ll post pics of it when I’m done. Meanwhile, I thought you guys might enjoy, or be interested in how this fellow milled out the trigger mechanism.
The bullpup he came up with, and how the parts look in place:
Ok, now the metal work for you guys to check out:
I assume this setup would work in just about any bullpup application by getting the right length rod for the trigger attachment. I was interested in noting he seemed to have milled the trigger himself. Perhaps it’s easier than I realize, but I wonder if this arrangement is really a time consuming project.
Anyway, hope this serves some purpose to someone. I just found it interesting, as I carve away at that bulky bullpup stock. I’ll post pics in “Other Guns” when I finish in a week or two.
Kindest regards,
All Thumbs Hoot 😯
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
I don’t want to invade this guys privacy, so I sent TJ his email address.
After TJ makes an inquiry, perhaps he can share the information with the rest of us.
Personally, I got the impression he wasn’t making these for sale. But I’d be guessing, so TJ can clarify for us.
The stock in-letting required some dremel work to get everything to fit properly. The hardware was good to go, except the linkage rod didn’t fit and I had to bend and dremel off metal, and some wood, to get it to fit and move freely. I may make another rod that is better formed.
I admit it was fun and I am delighted with the 19″ result. Fits under my truck seat very nicely. The fact that I can get 780 fps, 24 fpe out of an 18.1gr JSB absolutely delights me. Few critters within 100 feet are safe from my evil intentions from this day forward!
Hoot 😯
Hoot were did you order the kit from? I’m thinking I’d like to have one.
I’m way ahead of that. Down to custom carving, new curves, reduced wood, and an interesting finish.
Pics by next week, I hope, if the two tone finish goes on as hoped.
Hoot
How about something simple like this?
I haven’t put it together yet. As I mentioned, that stock is fugly and I’m giving it a major overhaul. For all I know the dang thng won’t even fit the stock.
Time will tell. I need about a week.
Hoot
Appreciate the pics Hoot.
The holes for shroud/reservoir appear to not line up, with the reservoirs hole looking quite a bit off center – does the scope mount sit straight on the gun?
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I’m the guy that makes the kit. Between the Marauder and the p-rod and the discovery kits I have out there, at least a dozen, never a problem with the linkage.
Obviously what happens after they are recieved is up to the individual.
PM me for details or if you would like my email.
Brad