Where to find cover for Foster fitting
I’ve seen some here have a rubber cap for the Foster fitting. Where can those be bought ? I have an ETaC an wanted that fitting covered.
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
very clever – matches the trigger, too
Here’s another 25 cent fix
5/16″ Screw Thread Covers – Black – not sure what size would work best
http://www.widgetco.com/screw-thread-covers-protectors-5-16-1-black
They always say think outside the box, well I thought inside the box, my spare parts box that is.
I had a brass female foster fitting I was not using, I trimmed off the nut with a cut off wheel, put JB Quick on the exposed hole and I now have a nice little brass cover.
Roachcreek
Heads up – I see those are magnetic and many Foster Fittings are not magnetic, therefore a change out of the fitting may be required to use the magnetic covers.
This is the one I have and it is way cooler then the rubber one I used to have on there. I stick it to my gun when refilling.
http://www.ninjapaintball.com/productDetail.asp_Q_catID_E_100_A_subCatID_E_89_A_productID_E_121
or check ebay under the paintball stuff
Go to the local hardware store or better yet, the local auto parts place and you can pick up a blister pack full of little caps for vacuum lines.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I bought a fill nipple cover off of ebay. It was expensive at $7 but I liked how it looked.