POI is Pissing me off
Wanted to blast a couple coons tonight and I’ll be damned if my gun isn’t shooting to the same spot 😕 Just a couple weeks ago I was drilling coons in the head now I can’t even keep a 12 inch group at 17 yards 😳
Can’t for the life of me figure out what happened.. haven’t dropped it or bumped it. Gonna go dial it in tomorrow… kinda takes the fun out of blastin Coons tonight :9: What a waste of Chum.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
With a loss of zero that big it’s gotta be the scope/mounts or your pellets are clipping the shroud.
i hope you’re exaggerating the problem because i don’t know any problem that would cause a 12inch group at 17 yards. even if you have a problem o-ring with fps varying from 900 to 700 fps, you wouldn’t get anything close to that bad.
if your poi is off by 12 inches, that’s most likely caused by your scope rings loosening/scope moving.
if your normal group is doubled or tripled, that’s most likely caused by a barrel that needs cleaning.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
I Figured it out…. It must have been clipping. I took off my shroud and it got loud and my groups got tight… when I put the shroud back on.. it got quiet and my groups still stayed tight… must have gotten bumped and ben a C-Hair offline.. All is good Now
Shot it over the chrony today I am averaging 680-685fps with a std valve shooting .25/ w 12 inch barrel to slow for my liking