Visit Talon Tunes
Updated on January 11, 2008
ronaldpdq
Participant
January 11, 2008 at 10:30 pm
Q:

Swapping .22 for .25 occasionally

HI,

I’m thinking of getting a .25 condor and was wondering if it’s possible on occasion to swap in the .22 barrel and how quick does it take to do that, thanks

Airforce Rifles/Pistols

All Replies

Viewing 4 replies - 1 through 4 (of 4 total)

skybones
Participant
January 12, 2008 at 3:59 am

Breech end of .25 barrel must be the same as breech end of .22 barrel so that the same slide works for both. Change over is very quick ,and easy.

sirjeigo
Participant
January 12, 2008 at 1:46 am

I swap barrels often and my POI never changes somehow.

It takes me about 5 mins to do. I swap between 24inched .22 cal to 18inched .177 barrels. Taking about the power wheel and other internals is simple. Taking it apart has taught me a lot. It’s quite a simple air gun.

voltar-1
Participant
January 12, 2008 at 1:33 am

Ron, you will need to opt for the .25 barrel breech slide turned to the same diameter as the .22 which is no trouble at all. plenty of material to allow for that.
I’m sure once you get used to the dis/reassembly then it will indeed be a five min job.
Walter…

synopsys
Participant
January 11, 2008 at 11:22 pm

With my Talon I can change a barrel in about 5 minutes, I have yet to remove the PW, hammer, spring and bolt…

You will have to re-sight your scope or sights after swapping barrels…

I put it off thinking it was difficult and I was amazed how easy and quick it actually was.

JW

Viewing 4 replies - 1 through 4 (of 4 total)

  • You must be logged in to reply to this topic.

5 Comments