.308 or 9mm
Would anybody be interested in a .308 or 9mm conversion or complete custom gun? I have 2 .308 and 1 9mm barrel. I’m going to build one to see what I can get and seeing if there is any interest in them? Thanks Doug
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
I could make it with a .430″ hole in it. That is big. Etac is around .404″. They sell 9mm pellets at pyramid air. Mr. Hollow point has them also. Getting my .308 from Jerry. He doesn’t have any 9mm though.
I might be interested.
Dyotat, you know where I’m going with this.
I’d need a 9mm barrel, bushings, breech, and another always open valve, this time ported as much as humanly possible.
Where does one get 9mm slugs?
Timmy has several commercial .308 slugs to offer at a decent price and sizeable to best accuracy. Just sayin’… 😀
I will sell a machined and crowned .308 barrel and bushings for $230.00. I have a extra one.
Still working on price. Depends on how the valve works I’m making. It would be
Barrel with bushings
Barrel guided hammer
Breech
Big Bore valve
Most likely a heavier spring
Probably around $700-$800
Your going to need more than just a barrel to shoot a slug of that diameter… 😉
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
For my 9mm prototype we make a 13mm valv with a 4 stage hammer and the selphb/blodnob spring.860fps by now with 124grains pistol reload bullets, the black ones with teflon covering, (five good shots).
We hope get 1100 fps this year 😉 but with a longer barrell.
maybe with a smaller diemater bullet you archives more velocity/energy.
Regards
From the land of The Tango and The Gauchos
Mac 😆