What kind of adapter do I need?

I have a Hill pump and I use this,

http://www.pyramydair.com/s/a/AirForce_1_8_and_1_4_BSPP_Refill_Adapter_set/303

Dude all your going to need is 1/8 BSPP that screws into your pump, length of hose if you want hose for the flex then your bottle adapter that fits the other end of the hose.

Now if your wanting this to be ridged, you can buy the AF tank adapter with the 1/8 BSPP or the 1/4 which ever fits your pump. All you would need would be the one adapter to go from the pump and this adapter would be what you screw your tank in to fill…

Now I would be your pump is a 1/4 BSPP instead of the 1/8… If its the 1/4 as I figure it is, you could do this task of yours with something like this:

http://www.pyramydair.com/s/a/AirForce_1_4_male_BSPP_Adapter_For_AirForce_Guns/105

Then if you hard fit this to your tank or fit this to your small fill hose. You can get to the same goals here at hand many different ways… Even a quick coupling setup that not only makes things hook up and switch out much easier, it also provides you with a swivel action that is very nice when turning and twisting stuff like this…

Now if your not sure what size this has both 1/8 and 1/4:

http://www.pyramydair.com/s/a/AirForce_1_8_and_1_4_BSPP_Refill_Adapter_set/303

Then with the quick connect stuff you have all sorts of different ways to go, but same as before, with it made up solid fitting to fitting to pump, or your hose setup…

Its all good…

AFU1012 PA has’em