Tools and extras needed for a EdGun break down?

Okay, I have metric allen keys and silicone grease is on order. What else do I need for taken her down to the skivvies?

Thanks
Carl

EdGun

All Replies

Viewing 6 replies - 1 through 6 (of 6 total)

oldgoat

Participant

January 24, 2012 at 9:58 pm

Allen wrenches, wood dowel, hammer or rubber mallet, straight blade screwdriver, 2 strap wrenches or channel locks might be needed if you are taking the regulator/air valve housing apart and if you are wanting to remove the shroud nut, a 20 mm open end wrench and a bench vice.

Ed really torques that shroud nut down!

traxx

Participant

January 24, 2012 at 5:10 pm

I guess your right, I don’t swing a hammer like I used to.

love-my-talon-ss

Participant

January 24, 2012 at 5:05 pm

quote Traxx:

3 lb shop or 20 lb sledge?

I would go in between the 3 and 20 lb you do not want to wear yourself out to quickly but you still want to get those efficient, effective, precise, destructive blows. 😉

ltlurker

Participant

January 24, 2012 at 4:52 pm

A sledge hammer is good, but don’t underestimate the benefits of a good crowbar.

traxx

Participant

January 24, 2012 at 4:43 pm

3 lb shop or 20 lb sledge?

love-my-talon-ss

Participant

January 24, 2012 at 4:41 pm

A really big hammer 😆
Sorry I could not resist.

Viewing 6 replies - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.