Q:

Changed my Cast bullet gun

It is now a Talondor, with a 16 inch unchoked LW barrel, I cut the choke off and recrowned it.

It has a WOK Guard, off set tank adapter, .72 wire hammer spring powering a cut down to 95 gram barrel riding hammer, two screw trigger mod with Tagdaggers valve spring retainer and spring and derlin seat, with the RL valve stem.

I am using a 2×7 Burris Fullfield scope with ballistic plex, a fandyfire 501 light and leapers laser.

With a 3000 PSI fill and the PW on max, the top hat at 1.1, my LBT 57 grain bullets are hitting 850 FPS/91 FPE for about 10 shots. That is 100 FPS faster than a 50 grain RN out of a 25 acp. The rifle is doing the same velcocity at 150 yards that the 25 acp gets at the muzzle with a 7 gain lighter bullet.

Accuracy is running at a average of .8 at 36 yards and leading is at a minimum since the choke met up with my flex shaft dremel cut off wheel.

It is just a short light accurate and powerful package.

The old 24 inch barrel is going to Dayotat to get the lead cut off and returned to a King shooter.

The shoes are Merrell loafers. 😆

Regards,

Roachcreek

Airforce Rifles/Pistols

All Replies

Viewing 2 replies - 1 through 2 (of 2 total)

😳 😆
RC

Ya know, if you weren’t so damn independent, you could get decent results with good ammo and nobody would be making fun of your shoes…

Viewing 2 replies - 1 through 2 (of 2 total)

  • You must be logged in to reply to this topic.