Marauder pistol bullpup
Tribute to EdGun Lelya… 😉
from the paper
to Foam:
handgrip angle comes from my Glock 26, very natural and confortable.
other side view:
wood log…
trigger mechanism
displaced gauge
and a few hours ago… barely paper sanded… 🙄
comes mor paper sand work, a couple of wood paint an then black finish.
All Replies
These guys have a drop in air volume doubler kit for $145, plus shipping, and it’s well worth the cost. A Prod bullpup with all the power mods, repeater, twice the air/twice the shot count, in a bullpup would be damn hard to turn down.
I’m trying to talk him into making a bulllpup trigger assembly, linkage, and scope mount for the Prod, and leave the stock up to the buyer. Most people can make a wooden stock, or have it made fairly cheap.
One thing for sure is Benjamin doesn’t have the brains to produce and sell one. Evanix is coming out with at least three new bullpup models this Spring.
American air gun manufacturers…they just can’t take a hint!!!
H 😯 😯 T
Shame on me!!! But…
I just let ir as you can see. When i test the speed string, i put 3 shots in 1″ at 55yd (2 1/2″ below aiming point) so i start to use and let as is.
My point is: Doves dont’t care! 😳
😆 😆 😆
Gringoloco do you have pictures of your finished P-Rod bullpup? I’ve been trying to decide what airgun to buy next and the P-rod has been on the short list. Turning it into a bullpup seems like the perfect project. I’d really like to see more pictures. Thanks. 😀
Fine HooT! But… Googlish and Googlpanish are really very very funny!!!
I own that site, any suggestions are wellcome. Many of us come here everyday… We all are Airgunnitis Infected!!
BTW… Almost 300 LR more of us are Airforce Airguns fans. Last yeay i sold my Talon ToGo .22 here in Buenos Aires!!!
This forum is one of my “favoritos”
Adiós amigo!
(As you said in so many movies there in USA) 😉
Gracias por la página de referencia. Me pareció muy útil. Disfruté de la transferencia de información Prod puerto también. En la actualidad existe una “doble cilindro de aire” disponible para la picana y me siento muy tentado a construir otra modificación de art. Me encantarÃa que fuera un bullpup, y tal vez pueda usar sus sugerencias para que el hardware.
Muchas gracias por su ayuda y paciencia! Además, ahora soy miembro de ese foro y se puede ver que más a nuestros hermanos del sur han inventado.
Por favor tÃo Hoot
Hoot,
If you look close at that trigger, it almost looks like the trigger is made from a scope ring, the ring goes around the air tube and the pivot for the trigger is the screw to hold the clamp to the scope base.
It would also cut down on work if the air guage was removed, I mean you only get what 2 or 3 mags thru these anyway? At 63 I can still count that high and have gauges on allmy fill whips.
RC
One big questions is WHERE did you get the materials?
If the parts have to be lathed by me, then there is no hope. However, if it’s just a matter of using off the shelf products and dremeling them to fit, then it is possible.
Thanks for the help!
H 😯 😯 T
Ley me take some more photos for you HooT. All parts are home made.
Where did you obtain the parts for the trigger linkage and assembly, and what parts are needed?
The stock is do-able, but the linkage parts are tough for me. A little help here?
Thanks!
H 😯 😯 T
EdGun Lelya… too far from Argentinian Hands!
Get any Edward product here is very difficult, for timew reasons, our “market” is small compared to USA…
so, to put our hands on an EdGun… a year or so… snif , snif… 😳 😥 😥 😥
At the moment i just buy une of these Handguards, (for FN Fal), but needs a few “cutting down services” for proper work…
[/img]
Thank you for sharing nice photos.
i have a spare .177 TalonSS 12″ or the original .22 12″…
hummm
lathe, insert for Marauder Pistol Breech… too mucho or nothing to gain? 🙄
VERY INTERESTING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 😯
You’re giving me some really good ideas! 😉
- You must be logged in to reply to this topic.
Ir you ask me… It’s all about sharing all we develop for us. Same with our “codo” finally AF sell it! 😆
Good for all you there!
I’m thinking now in a modification of my FX Independence. On board pump, 230BAR, low LOW noice signature… 12 shots…
One thing… I know, Bullpup stock… On all my rifles, fever never Ended ! 😉