Todays readings on my 2013 Condor/Need feed back please.
Some one told me there must be something wrong with my crony? Theses are the numbers I got today?
This Condor is 24″ LW barrel, has stock hammer, Stock valve and stock Top Hat that has outta box settings. I do have a small O-Ring behind the Top Hat. I removed the rubber Fender Washer on the Hammer side of the breech.
All shot’s were taken with 43.2 grain EunJins
Crony at 2ft with 2800 psi in tank
982.3 fps……………92.58 ftp (11 on power wheel)
974.7 fps……………91.16 ftp (11 on power wheel)
Crony at 55 ft with 2800 psi in tank
906.6 fps……………78.86 ftp (11 on power wheel)
898.3 fps……………77.43 ftp (11 on power wheel)
Crony at 2ft with 3000 psi
1001 fps…………..96.14 ftp (full power)
992.9 fps………….94.59 ftp (full power)
Crony at 55ft with 3000 psi
930 fps………….83.09 ftp (full power)
913 fps………….80.10 ftp (full power)
From my experience this gun shoots best below 970fps between 970fps and 890fps with 18.13 JSB EXACT Jumbo Heavy Diabolo pellets in both .22 and .25 caliber.
The .22 caliber appears to have tighter groups then the .25 caliber but then again my .22 barrel is 18″ where as my .25 barrel is 24″ this could play into it as well.
Oakey
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.

Thanks Dave that was informative.
I was told there maybe something wrong with my crony because of these high numbers on a stock Condor? Anyone have numbers this high?
Thanks
Oakey