Q:

What’s the best way to load/operate a bullpup

I had some target time yesterday with my D-max bullpup and although it’s a joy to operate when hunting the MMC requires lifting the gun from my benchrest support for cocking. So, I started thinking of what would be the ideal and easy way to cock a non semi-auto bullpup. My Viking has a sideknob attached to the hammer. It’s easy to use and shows whether the gun is loaded or not, but it means that I need to lower the gun a bit to cock it. I believe the same goes for normal bolt action and sidelever. This leaves us with something that can be operated with your left hand (or right hand for lefties) from the front of the gun. There are some pump action cocking guns like Hatsan but I hear they require quite a lot of power to cock. Calibr Colibri seems to have a simple pull back bolt on front which might be a good idea but again might require some effort to pull back. How about if we moved a cocking lever to the front left side? It should require little effort to operate and should be easy to flip with your left hand. It could be attached to the rail support of most bullpups. Maybe even biathlon style lever that swings back to front position? What would you think as an optimal solution (besides semi auto)?

BullPup General Chat

All Replies

Viewing 12 replies - 1 through 12 (of 12 total)

Coat? Uncle H 😯 😯 T has one you can borrow. A stained Trenchcoat he uses while he´s flashing around in Toad Suck.

quote Hoot:

You would be better off posting this type of technical idea over on the “Mods and Machinists” section.

Most of us here can barely read and write, much less comprehend what you are saying. The smart ones hang around over at that
other section, and talk “technical” to each other. We view them as a bunch of perverts, but they are handy when you need something
done that exceeds the ability of a screwdriver and pliers.

Kindest regards,

Uncle H 😯 😯 t

The rest of this thread more or less proves that you are right 🙁 I’ll get my coat.

I use duct tape for everything. That´s my God given right,damn it! 👿

You may have to change your avatar. Twins? 😳

quote donnyfl:

Does that really work? Going to try it tonight and get back to you next month. Stay tuned!

quote Hoot:

quote Sir Ville:

Well said…for a man who uses duct tape for a condom!
H 😯 😯 t

More information we don’t need to know. :mrgreen:

quote donnyfl:

Does that really work? Going to try it tonight and get back to you next month. Stay tuned!

quote Hoot:

quote Sir Ville:

Well said…for a man who uses duct tape for a condom!
H 😯 😯 t

Does that really work? Going to try it tonight and get back to you next month. Stay tuned!

quote Hoot:

quote Sir Ville:

Well said…for a man who uses duct tape for a condom!
H 😯 😯 t

Hoot, doesn’t your family tree resemble a telephone pole? I mean you do live in Arkansas!!!!!!!

quote Sir Ville:

For once the trusty, albeit rusty Uncle is right.Here you´ll only get answers like : The best way to load & operate a Bullpup is with compressed air and pellets of your choice. Our IQ hardly exceeds that of a telephone pole…

Well said…for a man who uses duct tape for a condom!

H 😯 😯 t

You can´t deny anything MG. Just take a look at your signature – you´re a very sick man .. 😉

Hey! Speak for yourself. I resemble that remark. :mrgreen:

For once the trusty, albeit rusty Uncle is right.Here you´ll only get answers like : The best way to load & operate a Bullpup is with compressed air and pellets of your choice. Our IQ hardly exceeds that of a telephone pole…

You would be better off posting this type of technical idea over on the “Mods and Machinists” section.

Most of us here can barely read and write, much less comprehend what you are saying. The smart ones hang around over at that
other section, and talk “technical” to each other. We view them as a bunch of perverts, but they are handy when you need something
done that exceeds the ability of a screwdriver and pliers.

Kindest regards,

Uncle H 😯 😯 t

Viewing 12 replies - 1 through 12 (of 12 total)

  • You must be logged in to reply to this topic.