regulated condor ss
I am looking at a jds airman reg for my condor 22 but I am wondering if i will need the etac reg setup with it in order to attach my tank to the gun once i have installed the jds airman reg or will i be able to just install the jds reg without the etac and still be able to attach it to my gun.
Also will i be able to use my stock top hat or should i buy the talon tunes tophat???
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Dont think weight is an issue. Length of pull is more of an issue and angle of adapter,
Have not built one yet. Just read about it, others could be more specific
,
Im thinking of using the 2500 psi reg to etac and than using the TTTH to adjust power further from there with the inserts. this would allow me to shoot heavier and lighter pellets.
Should I use the 48 cu in bottle jds offers or is there a different bottle that would be lighter maybe a carbon fiber one?
go to this search .
lots of reading on regulator set ups.
yes: on using your stock valve
regulator screws to tank, your can get reg with m18-1.5 thread (condor bottle thread)
or 5/8- 18 UNF thread most other bottles , paint ball and such
then you have to have something to go from regulator to air force valve, etac, co2 adapters etc.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Should I use the 48 cu in bottle jds offers or is there a different bottle that would be lighter maybe a carbon fiber one?
Doesn’t work that way with a reg setup. I would say a 2500 psi reg will get you in the 930-950 fps area. You need a large volume of regulated air to do what you are talking about.
With a large chamber I get 960 on 1800 psi. Then I can turn it down with different TH settings. .