HILL PUMP MK2 O-RINGS LIST
For those guys who need the list o-rings for the hill pump . I bought original set from UK and measure it with caliper. It is for verison MK2 pump.
O-ring for non return valve is 3,4×1,8 or 3×1,8 This o-ring is not written on the paper. All dimension are in millimeter.
Attachments:
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Tomorrow I will find picture again. I will repost it again. I completely buy from our local store all of o-rings.
Or may be:
2.9×1.78mm
http://www.ebay.co.uk/sch/i.html?_odkw=o-ring+3.17×1.78&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xo-ring+2.9×1.78&_nkw=o-ring+2.9×1.78&_sacat=0
3.17×1.78mm
http://www.ebay.co.uk/sch/i.html?_odkw=o-ring+2.9×1.78&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.Xo-ring+3.17×1.78&_nkw=o-ring+3.17×1.78&_sacat=0
Guys the picture doesn’t work anymore.
Can you please re-post?
You can try 3×2. You will see if will work.
So that’s inner diameter of the ring and thickness? Any ideas where I could get that 3×1.8 o-ring in Europe? Or should 3x2mm work? A quick e-bay search didn’t find anything.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Did you get a chance to find the picture again by any chance?
Thanks