4 holes top hat plus diy condor frame
OK guys i found this in the internet
its says walther haha
what do you think
AND THIS ANOTHER VALVE
i KNOW ITS CHINESE MADE
ok guys this is too much i think we need to stop those chinese see this link
http://www.aliexpress.com/store/product/Section-DIY-materials-free-processing-Pcp-AirForce-Condor-Gunpower-Shadow-Gunpower-Storm-Aluminum-profile/1022039_1467616525.html
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
Maybe something like 4 valve heads? I think maybe Honda did some research on lots of little valves in different configurations. Many small ports move more air than a single large passage of equal cross-sectional area. I’d be interested in seeing some tests. I don’t know that airguns are all that similar to blown F1 powerplants.
John
Back in my paintball days the ports were all the rage….until it was shown to cause the air to stumble and slow down and require more pressure to get the same from a single air port. The air has to fight to get through those 4 little holes… now if you want to use more air to get the same done as a single port then sure that is what you want. If you want unrestriced air flow and squeeze all the power you can then you want on big port with no restrictions.
The first mod people will do to that valve is bore out that top hat to improve air flow
Must be Walther Lee! 😆
Might make for a nice salt shaker. :8:
Maybe something like 4 valve heads? I think maybe Honda did some research on lots of little valves in different configurations. Many small ports move more air than a single large passage of equal cross-sectional area. I’d be interested in seeing some tests. I don’t know that airguns are all that similar to blown F1 powerplants.
John
All kinds of alarms are going off in my head. Let’s see, design theft, blatant lies and then there is the usual very low quality products typically made by Wang Po Industries.
weeeeeellllllllll, here is the thing though and i’m not sure what the gig is but, the 4 holes could be for more regulation of airflow. So more about consistency than power. Everyone in the AG business is trying to be REGULATED like the EUROPEANS and less POWER oriented. But, i’m just guessing at that….lol!
If it restricts airflow, then it REGULATES
The hole dimension is 2mm each
That’s what it says in the website
Horrible idea. Why on Earth would you want to restrict airflow with 4 small holes? For power you want that opening a big as possible for smooth air flow.
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Anything that has a “Made in China” sticker on it is suspect for low to bad quality in my thinking anymore as so much of what see coming from there is total crap.
From what I’ve read Wang Po Industries aught to translate to Dam Poorly Made Industries!