Edgun fill probe to Foster wanted
Anyone out there have a source/link so I can put a Foster/quick connect male on the opposite side of the Edgun fill probe? Trying to get everything converted to Foster.
Would that be a female 1/8″ bsp to male Foster?
Thanx.
All Replies
A brilliant shipper in my view. I have bought loads of stuff from them. Great quality, quick dispatch and fantastic service ! :biggrinn:
Order them from http://www.bestfittings.co.uk surprising they ship pretty quick…
I may have to blow some more cash on two more adaptors from pyramid air. I cant seem to find those Dowty washers/sealers locally.
Joe’s prices are too high on many things like these adapters so he is a vendor of last resort for me. Then when his DWs leaked he ripped folks again on the delrin washers. I got suckered on one of his but then bought 4 from Pyramyd and they have been leak free.
So now I need to find and get those washers or just a new QD… back to the hand pump again!!! 👿
Damn that probe or should I say QD!! 🙄 I could not figure out what was leaking and this confirms that it is the QD and yes I paid $24 from joeB and I bought 2 of them lol…. so with only two (2) fills to my R3M I lost 800 psi in my 4500 tank at that rate I may get 4-5 fills out of the tank not 30! LOL :angrymob:
So now I need to find and get those washers or just a new QD… back to the hand pump again!!! 👿
A Weihrauch fill probe works on EdGun’s and i think there’s an QD probe available for those HW’s. Let me dive into my records and report back asap…
Sent from my iPhone using Tapatalk 2. This POS iPhone sucks though …
So very lovely, almost sensual….
Blobcat style will be avoided, if possible.
Syn, I was planning on the Teflon, away from the passages; thanks for the vote. You never know when you might want to take the rig apart, aside from sealing.
The QDs are getting so popular, wish all the manufacturers either used ’em or supplied QD one-piece, Ville-has-one-and-we-don’t, adapters. Otherwise, the more guns you have, the more non-standardized crap you got floating around in plastic bags, trying to keep clean. “Let’s see…the AA has their own twisty thing, the Cricket has a probe, but not the same probe as an Edgun (but either probe can inflate a squirrel) and the FX and AF use the QD :angrymob: Four fill connector designs, so far 🙄
The PA one works just fine without the “Bobcat ugly” washer thing sticking out… 😯 😯 😯 
A little Teflon tape don’t hurt either (just keep it away from the business end).
Here it is on a Cricket & Edgun:
I worked on the Joe B version with three washers stacked together and never did get it to seal, I really tried !!, just do the Pymamid Air version and be happy, the Dowty washers are proper as Wing says but the Pyramid deal works the first time.
That seems like a more secure solution. That said – my QD fill probe (pictured above) works flawlessly but haven´t seen them for sale for EdGun´s. Someone oughtta make one ! Eeerneeeest !!!! :whistle:
The problem may have been the washers that Joe B was supplying with the adapters. Now we all use the delrin inserts both he and Pyramyd supply. That adapter is $10.
Really, Coda ?? Forgot my Scuba tank home a while ago but had the OEM fill probe with me in the Gun Bag together with different connectors so i had to make-do a fill probe to fit a friends QC (for his disgusting FX). I did that exact way. No leak but you do need to center it with some care before tightening or the rubber seal will be toast.
Same as mine …
The Cricket probe brass nuts are too small for those to seal so you must use the delrin inserts instead.
- You must be logged in to reply to this topic.
+1 for Best Fittings UK. A pleasure to deal with every time. :dito: