Edgun R3 One Screw Trigger Adjustment
Any tips on the best way to tune the newer one screw R3 triggers? I’ve got 2 older Edguns with the 2 screw triggers that I have adjusted to my liking, but I’m not sure how that translates to the newer one screw triggers. I could do it by trial and error error error error, but if anyone has tips I would appreciate it.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
I turn the linkage rod until I get the requred first stage length then add a little locktite.. You can then adjust the cap screw to the desired break pressure and remove creap. A little moly paste on the contact points of the sear and front ball of the cap scew adds to smoothness..
I guess it’s time for a little trial & error. I’m hoping to get a crisper break; right now it’s a long light pull with just a little drag in the middle. Not terrible, but not great, either.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Great, thanks. That gives me something to work with.