Regulator for marauder
Hi everybody!
Look at this:
Pressure – 140 bar. Volume – 15 cc. And we got 80 shots with 10.5 grain bullet at 280 m/s 😉
All Replies
Caboose212 ~ I wanna :confusedn: :suprisedn: but..c how.. :confusedn: MAN CAN YOU PLEASE CHANGE YOUR AVATAR…SO SHE CAN JUMP FASTER… :geekn: Hoot:
Try the BROD Adapter at jdsairman.com
The BROD Adapter is an Adapter to convert your Marauder to a Bottled and Regulated Gun.
This BROD Adapter allows a Metric Threaded Bottle (M18-1.5) to be attached onto stock and Custom applications requiring a jdsairman AF metric 3000psi Input and a Regulated Output Regulator of your choosing. Or you could use the jdsairman 13 Cu. In. Tank or the 22 Cu. In. Tank and the 3000psi Input and Regulated Output Regulator of your choosing.
Thank you for your help. I have a buddy that wants the marauder and I am trying to help him out with the mods.
I havent spent a lot of time tuning or testing this gun in the factory settings to know sorry, before I fitted this reg I had a heavier hammer spring fitted and had tuned t to shoot 32gr pellets to 900+ fps for about 13 shots.. I put the std hammer spring back in when I fitted the reg and de-tuned it for the kings and a higher shot count..
What was the fps and shot count before?
Yea I dropped the ball on that one huh?
Im getting 25-26 shots with Kings at 830fps with the reg set at 145 bar. The Reg Huub sent me was for a .22 Marauder so I made a slightly longer Plenum (higher volume) to suit the .25cal. I get about a 8fps max spread over those 25 shots so very good. I can also make the most of a 240bar fill to get more shots if needed 🙂
Thanks again Huub!
hey wing man just wondering if you got the results yet for with the new regulator.
I just installed one in my friends 25 m-rod.set reg for 150bar getting 24 shots before falling off reg.filled to 3200psi refilling at about 1850psi.my chrony screwed up and no fps readings as soon as new chrony gets here i’ll post shot string. 😀
It’s the same reg that is sold by Vincent! The Threads in the plenum body are 1/8″-27 NPS. That’s to be a direct replacement for the gauge body that normaly sits in the gun. Furthermore you would have the gauge mounted very deeply in the stock when you don’t use the adapter.
I’m not sure either- I think it’s so that it’s as “drop in” as possible… People don’t like it when they have “leftovers” when they disassemble and reassemble!! 😆 I think it’s the same reg. I just put one in an Mrod I’m about to finish…
Im not sure if Vincent sells them or not but yes you will need the 1/8″ BSP to an 1/8″ NPS thread adaptor or just fit a new 1/8″ NPS gauge directly to the reg as I have done in this pic.
Wingman- aren’t those the same Regs offered by Airgun Exporter? If so, the gauge threads directly into the reg no problem?? Airgun Exporter told me that I had to use the gauge adapter…
Huub just sent me one of his fine Dutch made HuMa regs for my .25cal Marauder.. I’ll get it fitted up shortly and post some strings and results.
Thanks again Huub!
Look at this:
Pressure – 140 bar. Volume – 15 cc. And we got 80 shots with 10.5 grain bullet at 280 m/s 😉
.177 i guess?
- You must be logged in to reply to this topic.
Always the review by Wing Master has its special taste ,,, i can’t wait to see your informative review as usual … i had marauder for about two years,, it is a very simple and good PCP ,,, accurate as well… i still have no mind if i can get one like Wingy has … :biggrinn: :biggrinn: 😉 in deed