what kind of numbers from a 12" barrel on my condor?
ok,
searched for the answer alot but didnt seem to find any definite numbers,
my .25 condor has an 18″ barrel in it,
but i was thinking about putting in a 12″ .25 barrel i have lying around to tame it down a little more.
i usually run jsb kings or baracuda/kodiak ,can anyone give me an idea of what kind of numbers i can expect?
my condor is still stock,the only thing ive done is added an oring behind the tophat.
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
have not tried removing the hammer weight.
Try removing the extra hammer weight? I have a condor valve on order and a tt 95 gram anti slap hammer and tt quick change top hat for my .25 talon ss. I’m pretty sure I’ll achieve stock talon p power ~50 fpe. Hopefully more though.
i had thought about that also,
it is probably going to waste alot of air.
ill have to hit a hardware store for a couple thicker orings to try,
i already had the one thats on it,its just one of the breech seals for my mrod.
but then again i could always dive in to adjusting the tophat down some also,
up until now i havent touched it.
You would be better off putting on a thicker o ring than a shorter barrel. A shorter barrel is less efficient.
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
well ,the 12″ barrel was less than impressive.
put the 18″ back in and tried some .25 benji domes, it LOVES them!