R3m .25 hammer spring screw broken
Hi guys,
Any one hade this problem before? The screw holding the spring is broke. how can i remove the hammer? 
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
Thanks, i will try that tonight
Make to take the trigger frame off the gun. I like to rest it flat on a piece of wood with a hole so the pin can have a place to go as I slowly tap it out.
Gabe
Thank you genet, i have no problem removing the broken piece but i was asking how can i remove the hammer part so i can work on it.
I am going to try what Gabe sujusted to remove the hammer
To remove pin.
Gerard,
Use a hammer and punch like this one:
Gabe
I’ve had pretty good luck with this style screw extractor:
http://www.amazon.com/SpeedOut-Damaged-Screw-Extractor-Bolt/dp/B00IRL3WP4/ref=sr_1_1/186-5246923-6760506?ie=UTF8&qid=1418478693&sr=8-1&keywords=stripped+screw+extractor
Before you use it, apply a bunch of penetrating oil (I like Kroil) and let it set overnight. Apply some more right before using the extractor.
If that doesn’t work, you will want to carefully fixture the gun in a mill or drill press and drill the screw out using a well-centered drill that is slightly smaller than the threads minor pitch diameter.
Good luck!
GsT
How Can i remove this pin
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Done, now removing the broken rod screw