All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
As soon as I can get a barrel from Tony I’ll be calling you for a regulator, i don’t know what PSI to reg at for 24″ .22 for 18gr JSB.. With my 18″ it’s around 2100-2200 psi. With the most restrictive top hat insert. That’s where my tightest groups are
Not that I’m aware of.
I thought it would be great to be able adjust externally, In the case of barrel or caliber change
You can find adjustable regulators that are adjusted from the inside.
As a general pattern, once you have found your sweet spot, you should not need adjust it anymore.
What is your need for external adjustments?
Cheers
Chris
I searched long and hard for a regulator set up and the only adjustable on from the outside I could find was from a guy in Florida that stopped making the drop down one. Citrusairguns.com was the website. The website still has the adjustable straight ones. Do all the math for the adapter to attach the reg to the valve, its all about volume. Dyotat and Rsterne here and on the GTA have a tone of info and all the math to figure out what you need to get what you want out of your condor. Good luck adn post back if you find something.
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
jD, your reg/adaptor… How much length does that add the bottle? Thanks Ken