Cricket Skeleton stock
Hey guys can you confirm that a standard skeleton wood stock will fit both .22 and .25 crickets? Thanks
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
Aw yes, I’ve seen that one also, ask him max $270 for it if I were you. 😆
The 22 cal standard it will fit, it dose on mines.
On the 25 cal the newer model with the wider frame it will not, you’d need to do some mortising to get it to fit I would think.
Also it has two hex screw mountings, one in the pistol grip and the other in the foregrip.
Not to sure if the pistol grip mounting hole will be in the same line up as.
~ ATB ~ GKU
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
The 22 cal standard it will fit, it dose on mines.
On the 25 cal the newer model with the wider frame it will not, you’d need to do some mortising to get it to fit I would think.
Also it has two hex screw mountings, one in the pistol grip and the other in the foregrip.
Not to sure if the pistol grip mounting hole will be in the same line up as.
~ ATB ~ GKU
Yep, I almost pulled the trigger on that stock too… The mount screws are different size on all the 2 screw vs. 1 screw mounts. I have a 1 screw skeleton stocked gun and I wanted to put my synthetic spare stock on it. The stock fits and the hole does line up but you will have to get a smaller diameter but longer screw if you are mounting it on a 2 screw mount gun. Oh and the skeleton stock is on a .22 and I swapped it to a .25… it fits except for the thread size on the screw. I got the screws at Lowes. Took the screws from the guns with me and just tried them in the little screw templates they have at the store where their specialty fasteners display is until I got the right fit. Then opened the drawers and found the screws I needed… took 5 minutes Max.