TT shroud
I needed a VERY quiet shroud for (LEGAL) semi-residential hunting. It was for a power modded TalonP that shot .25 heavy jsb’s at 990fps and was about as loud as a rimfire.
I told Tony that I wanted the absolute quietest shroud I could get and he suggested the 9in over the 6 which splits the difference between the talon and condor shrouds.
I took his advice and couldn’t be happier with the purchase. My gun’s report measures 46db at a distance of ten ft in front of the muzzle! The only sound is the hammer slamming home into the top hat. I can target shoot in my back yard and my neighbors don’t even notice. I own two “real” suppressors, classIII that is, and Tony’s shroud is built to the same quality as wither of those. It is by fast the best airgun shroud I have purchased in literally every category. Definitely worth it.
Thanks Tony
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Yes sir. The ends are sealed on there. I have seen the insides and could tell you but then tony would kill me. Lol im telling you he puts alot of work into these shrouds and they are worth every penny. I have built a few myslef and never thought of what he has done and it works.
Are Tony’s shrouds sealed from tampering and servicing? Nobody except Tony knows the secret baffles inside?
I got one last week and they are amazing! Cycle of the gun is louder than the shot. I just threw up my videos of me firing it with the decible meter. With my 3400 psi cf tank on it i was actually thinking my valve was not opening up all the way and went in and made sure everything was working correctly. Mine is 22 cal and slinging 45 gr slugs at 945 fps. It is my yote hammer and now its so quiet they wont even know where i shot from.
For the slap mod there is an oring attached to the face of the hammer. That is another very good mod from talon tunes. With the 95 gr hammer i leave my pw set at 0 and am still kicking out 90 fpe.
Cant tell ya how his shrouds are put together or whats in them but i will tell you if you are looking at one get it. I have an r&l shroud that works very well but not as good as my tt shroud. Its amazing.
I hardly use by Condor .25 with hammer mod and shroud. So please bear with me for these embarrassing questions.
First one is how is the shroud actually attached to the gun. Also how many bushings are in the shrould. I think that there should be three however please advise. It it a 9 inch shrould
Is there also a mod to quiet the heavy hammer?
Nice this is good to know!!! :smilen:
I told Tony that I wanted the absolute quietest shroud I could get and he suggested the 9in over the 6 which splits the difference between the talon and condor shrouds.
I took his advice and couldn’t be happier with the purchase. My gun’s report measures 46db at a distance of ten ft in front of the muzzle! The only sound is the hammer slamming home into the top hat. I can target shoot in my back yard and my neighbors don’t even notice. I own two “real” suppressors, classIII that is, and Tony’s shroud is built to the same quality as wither of those. It is by fast the best airgun shroud I have purchased in literally every category. Definitely worth it.
Thanks Tony
:dito: There is nothing sweeter. Now you can buy his hammers slap mod and make that gun STEALTH. I have it and all I hear is the pellet hitting the Duct Putty in my trap.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Naw, that is cool Tony has a proprietary way of making his. Nothing wrong with that, he’s a business man. Just like Randy’s shroud for RL.
Me I have probably used five different styles between my partner and I before we settled on the “K” baffles we use now.