.35 kalibre cricket
Hi guys !! To any one that owns a .35 cricket I would like to no your thoughts and experiences house had with them. All information would be appreciated. Thanx.
All Replies
Viewing 2 replies - 1 through 2 (of 2 total)
http://talonairgun.com/forum/viewtopic.php?f=33&t=31025
quote drid:
Hi guys !! To any one that owns a .35 cricket I would like to no your thoughts and experiences house had with them. All information would be appreciated. Thanx.
Viewing 2 replies - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
I’m gettting a .30 and .257 “TJ” barrel machine for testing as we speck.
The 9mm is limited to around 830fps with the 81g, limiting factor was the hammer spring not strong enough but I think the hammer is heavy enough—twice+ the weight of the .25 cricket.
The best part its the regulated chamber has enough volume 50 to 60cc or about 1/4″ of the air tube, and yes the air tube is in 2 pieces.
with this platform and hopping to get the .30 up in the upper 975fps+ with 46g and in the 900+ with the .257 shooting 88g slugs with the mod HS.
Also have a new probe with a 2.25mm pin, stock has 1.75mm pin. barrels will have a smooth ramp in-leading for easy of loading slugs.
the .30 will have a mag—adding bushing to the stock mag. .257 maybe a single shot–will see when I get the slugs and see if they fit in length.
prior to testing I have to polish the rifling.
with this barrel mods I’m hopping for speed and accuracy and if they preform well—they will be available for the 9mm upgrade?—well that’s speed and accuracy that the stock barrel can’t provide==as for me 9mm its to big on a BP.