Cricket air pressure? 3000psi
300 bar? What should I be filling my .22 Standard Cricket too?
Thanks
oakey
All Replies
Viewing 14 replies - 1 through 14 (of 14 total)
I fill both my BP & carbine to 240b
That’s all I ever see :rofl:
The only thing Chad saw was (.)(.) BOOBS
Lol that is why I thought it was from flush because that might make sense 5 turns from flush. Lol
😀 At 5 turns on the stem the hammer will really need to be pounding the stem to get up to a decent velocity.
GKU!
My bad I did not catch the (.) In your .5 turns. I thought you said 5 full turns lol. I am an idiot.
I try the below fill only a couple of times just to see if it lost any efficiency with the air consumption.
My 22 standard is sending JSB 18g at 880 fps, I’m getting 7 mags = 98 shots with a 270 bar fill.
The efficacy rating is still 1.43 bars/shot.
My Valve spring is set to .5 turns, reg set to 120 bars and Imppu HST v3 @ 3.5 turn in from full out.
~ GKU
Is your valve spring, 5 turns from flush with the valve body?
No Sir, we usually measure it by the amount of turns CW after the retainer just makes first contact with the valve.
.5 turns is when the retainer first touches the valve, tighten retainer .5 turn CW (or 1/2 turn CW).
~ GKU
I try the below fill only a couple of times just to see if it lost any efficiency with the air consumption.
My 22 standard is sending JSB 18g at 880 fps, I’m getting 7 mags = 98 shots with a 270 bar fill.
The efficacy rating is still 1.43 bars/shot.
My Valve spring is set to .5 turns, reg set to 120 bars and Imppu HST v3 @ 3.5 turn in from full out.
~ GKU
Is your valve spring, 5 turns from flush with the valve body?
I usually fill to only 220 bar or so for the reason that it’s hard on the O-rings and it does make the POI shifting more pronounced.
I try the below fill only a couple of times just to see if it lost any efficiency with the air consumption.
My 22 standard is sending JSB 18g at 880 fps, I’m getting 7 mags = 98 shots with a 270 bar fill.
The efficacy rating is still 1.43 bars/shot.
My Valve spring is set to .5 turns, reg set to 120 bars and Imppu HST v3 @ 3.5 turn in from full out.
~ GKU
I fill mine to just under 3000 psi and I get 5 mags also at around 910 fps.
Thanks. 240 bar is what it is.
I fill my .25 to 240 bar and get 60 shots (5 mags)
Sent from my iPhone using Tapatalk
Pointless going over 240bar. 220bar is plenty.
Viewing 14 replies - 1 through 14 (of 14 total)
- You must be logged in to reply to this topic.
that what I have done last two sessions.