Q:

Trigger pics

Would some one please give a detailed discription of how to take the trigger apart on the new condor SS
And reassemble it. Some pictures would be nice to. I want to change the springs in mine to lighten the pull.
I have done a search on the removal, disassembly of this trigger with no results.

Airforce Rifles/Pistols

All Replies

Viewing 6 replies - 1 through 6 (of 6 total)

Thank GKU I’ll give it a try when my patients are high.

That’s the one.
Also, to let you know it will void your warranty if you didn’t know already.

Just take it off slowly and the 3 springs will be pushing on that cover plate.
If you are still worried about parts flying place the gun in a clear plastic bag.
Cut 2 hand slots in the bag to do the work in.

Also there is a ball bearing/spring and safety spring that can be lost if you start moving things around or punching out the pins.
Which I don’t recommend doing, some are unable to reinstall the trigger group right and the gun can’t be cocked.

~ GKU

Ok, I don’t have to disassemble the trigger to change the springs, just remove the cover. Where is the cover located?
Is it the one on the bottom of the gun? I removed the for arm and it looks like there is one screw holding it down. If I remove the pistol grip and this screw will the cover come off? Will springs go flying?

quote oakey631:

quote GKU:

Pics are right on the very top of your post tread.

http://talonairgun.com/forum/viewtopic.php?f=4&t=26790#p263801

You don’t need to take the trigger group apart to change the 3 springs.
Just remove the cover plate.

~ GKU

Send me some springs :biggrinn:

You mean Pilots G2 pen springs ?
If you’re in the US, I’ll send you some to lengthen yourself.
If so, PM me your name and address I’ll send you some no charge.

~ GKU

quote GKU:

Pics are right on the very top of your post tread.

http://talonairgun.com/forum/viewtopic.php?f=4&t=26790#p263801

You don’t need to take the trigger group apart to change the 3 springs.
Just remove the cover plate.

~ GKU

Send me some springs :biggrinn:

Pics are right on the very top of your post tread.

http://talonairgun.com/forum/viewtopic.php?f=4&t=26790#p263801

You don’t need to take the trigger group apart to change the 3 springs.
Just remove the cover plate.

~ GKU

Viewing 6 replies - 1 through 6 (of 6 total)

  • You must be logged in to reply to this topic.