Oring kits and tips
If wanting an oring kit In the future I have them, if you have an edgun reg tested I can get you the sleeve to test/set the Mutant reg pressure.
If your ever in the reg–replace those hard Teflon oring–they get even harder with 140+bars and they will wear out the metal faster plus your ES will lower.
Here is the sleeve to test the mutant reg from dman1114.
Finally got the butt pad back on, as you can see I vented the rear and between the baffles on the shroud–wanted the pellet
more stable existing but mostly got more quieter–more quiet I just screw on Donny’s 6″ LDC with John 1/2″ 20 adapter.
Just as quiet as my HB!
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
The cz 200 barrel is a “close” to drop in ready…
The breach end gets faced off a touch.. then the TP is enlarged.
The muzzle end gets threaded 1/2 by 20…..
Does the mutant use the same barrel TP as the S-200? Also is the barrel held in place in the same manner as the
s-200?
Thanks
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
The breach end gets faced off a touch.. then the TP is enlarged.
The muzzle end gets threaded 1/2 by 20…..
Thanks!