Visit Talon Tunes
Updated on September 1, 2015
kevinbrian
Participant
September 1, 2015 at 5:16 pm
Q:

Matador Regulator tech question (you too, Ed)

He fellers. I learned from y’all that the reg is set at 130 BAR for the 22 and 25 cal Matatdor R3M. Is the regulator set to 130 for each and every gun? How does the maker set them? With a pressure qauge???? By measuring the millimeters of a reg that is set to 130 Bar and then applying that same length to the rest of the regs? I know that there are a few reg gauges out there and I am curious to know how close to 130 BAR and how consistent are all of the EDguns.
Maybe some are 125 BAR and other 135 BAR? Ernest could probably answer this question of how consistent are the EDgun regs (with regards to their factory setting of 130 BAR).
And one more question, how much does a ‘quarter-turn’ of the reg adjustment screw effect the reg? 5 BARS? 10 BARS?
Thanks! kevin

EdGun

All Replies

Viewing 8 replies - 1 through 8 (of 8 total)

kevinbrian
Participant
September 18, 2015 at 9:36 pm

I appreciate the replies and apologize for being so late in acknowledging your replies. Thanks…….alot! 😎

atirador-fbl
Participant
September 16, 2015 at 6:14 pm
quote gerard:

All regulator set to 130bar using reg tester at the factory, by the way Francisco is an amazing great guy, we where together the last time in the Edgun factury.

Francisco really is a great person. But Francisco Jr. I referred (that answered the question of reg) is a Brazilian friend, business partner of the Francisco from Argentina.

Enviado de meu LG-D805 usando Tapatalk

gerard
Participant
September 15, 2015 at 1:27 pm

All regulator set to 130bar using reg tester at the factory, by the way Francisco is an amazing great guy, we where together the last time in the Edgun factury.

kevinbrian
Participant
September 15, 2015 at 1:08 pm
quote Atirador fbl:

I asked about the regulator’s factory setting to my friend Francisco Jr, excellent professional who performs authorized service provider Edgun in Brazil. He informed me that all regulators go through reg test before they leave the factory. Therefore, they are all 130 bar. Not 129 or 131. All come with 130 bar.

Enviado de meu LG-D805 usando Tapatalk

Thank you, Atirador fbl.

atirador-fbl
Participant
September 13, 2015 at 6:49 pm

I asked about the regulator’s factory setting to my friend Francisco Jr, excellent professional who performs authorized service provider Edgun in Brazil. He informed me that all regulators go through reg test before they leave the factory. Therefore, they are all 130 bar. Not 129 or 131. All come with 130 bar.

Enviado de meu LG-D805 usando Tapatalk

kevinbrian
Participant
September 1, 2015 at 10:39 pm

I have a friend with a tester. But I was planning on keeping the regulator at 130 BAR. But I may ask him to send it so that I can see if it is set at 130 BAR exactly. Thanks for the replies.

oakey631
Participant
September 1, 2015 at 9:49 pm

:dito:

keyser-soze
Participant
September 1, 2015 at 7:45 pm

If you are going to play with the regulator get a tester. It will save you so much time.

Viewing 8 replies - 1 through 8 (of 8 total)

  • You must be logged in to reply to this topic.