9 oz CO2 bottle

Has anyone used a 9 oz bottle on their Talon? I was wondering if the butt plate strap would fit it. The 12 oz bottle is too big for the strap.

Talon/Talon SS

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

teep

Participant

November 30, 2015 at 4:12 pm

If you look at the photo I posted above you will notice that the extra tank also has a 1/4″ aluminum disk epoxied to the end. This disk has a threaded hole in it to allow use of the old AirForce straigth butt plate. Before making the slip-on stock I had a vinyl cover that slipped over the tank and used the AirForce butt plate.

ray384

Participant

November 21, 2015 at 2:26 pm

I tried the paintball butts, but they were too small to fit the tank. For a while I used nylon ties to hold the buttplate onto the tank. I now am experimenting with a leather shim on the clam. Unfortunately, so far one is too thick and the other is too thin, but it shows promise.

I really like the 9 oz bottle compared to a 12 oz.

teep

Participant

November 21, 2015 at 2:05 pm

I wanted a drop in the shoulder stock so I built a stock from a pvc tube. It is a snug fit on the 9-oz. bottles.

ray384

Participant

September 25, 2015 at 6:23 pm

Thanks, I forgot about them.

Anonymous

Inactive

September 25, 2015 at 9:40 am

I bought a cheap slide on plastic butt stock made to fit 9oz co2 bottles.
http://www.ebay.com/itm/4-Paintball-Gun-7-9-oz-CO2-Tank-Butt-Shoulder-Stocks-endcaps-9oz-Black-LOT-/381375483473?hash=item58cbc00e51

Viewing 5 replies - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.