Barrel thread
Hi,
can anyone please tell me the barrel thread size that the shroud screws on to, many thanks.
Phil
All Replies
Viewing 13 replies - 1 through 13 (of 13 total)
Grubscrew is not good solution. Maybe for sub 12ftlb limit but for full power air rifle is not good idea. Alignment is another issue…
no those are not very good, the barrel od may be ok but the grubscrew/s will have to go to the place where the thread is underneath,
I am not convicned that you can get good alignement.
you need some threaded one what screws on. still thinking maybe a airsoft adaptor acw cw m14, not sure about the pitch though
This one sure will fit. Then my use HW100 silencer.
http://www.ebay.co.uk/itm/GunTuff-14-15mm-To-1-2-UNF-Air-Rifle-Pistol-Airgun-Silencer-Moderator-Adaptor-/231351868710?hash=item35dda55d26:g:PWwAAOSwDN1UMBuo
Would this adaptor fit the barrel?
http://www.ronniesunshines.com/air-arms-s200-1-2-unf-silencer-adaptor
I need something to do for the long dark nights. 🙂
My best advise…. Call or PM DonnyFL!! Now he made my 25 very, very quiet as Elmer Fud would say!! Very good quality and well worth the very fair cost!! Just sayin
At the moment my gun is stupid loud, i’m going to knock something up when all the parts arrive. My 22 fac gunpower storm with a shrouded barrel is much quieter, and it’s running hotter. :4:
Phil
do the paintball silencers fit then with the adapter or it needs a custom adapter, the paintball stuff is m14, but can be antti clockwise. not sure about the pitch
look If you do the drilling out of barrel bushing mod from this forum, and plus install an M5 steel spacer
http://www.ebay.co.uk/itm/Stainless-Steel-Spacer-Standoff-Collar-Stand-off-Spacers-M5-M6-GWR-Fasteners-/271541168287?var=&hash=item3f391d689f:m:mwqiD-1AwphhWWHXXJlmH-w
for a .177 you will be fine no other mod is needed! I can confirm it to be working on mine
Got it chaps……….M14x1.25
Thank you Zonk, I will do that. :smilen:
Phil, I guess no one has an answer. Try e-mailing Evgeny.
Anyone ?………….pretty please :biggrinn:
Viewing 13 replies - 1 through 13 (of 13 total)
- You must be logged in to reply to this topic.
Why not get a good machinist to turn a proper adapter for you ? One that threads onto the existing threads and is properly centered ?? :butkick: