Paintball type regulator problem
I was swapping out regulators on one of my 17ci bottle and the pin didn’t pop out when I aired it up. Seems stuck with 2500 psi in it. I tried using my fill cap off my 90ci reg it has a longer probe to push the pin down. Didn’t work just bent the damn probe. I’ve tried a pin punch with light blows with my rawhide hammer nada. Any ideas?
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
quote Gippeto:
Crack either the burst disc or the foster fitting until it starts to leak and allow it to vent off all pressure…then service the reg.
Heavy gloves and safety glasses would not be out of place.
Al
Thanks Al I’ll give that a try.
Crack either the burst disc or the foster fitting until it starts to leak and allow it to vent off all pressure…then service the reg.
Heavy gloves and safety glasses would not be out of place.
Al
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Worked great! Thanks Al