NEW EDGUN MODELS FOR 2016 !!!!
HI GUYS. DOES ANY ONE NO IF ED HAS ANYTHING UP HIS SLEEVE FOR THE YEAR A HEAD. IVE HEARD THROUGH ONE PERSON TO EXPEXT SOMETHING. I CAN SEE ED COMMENTINGON THIS ??? CAN ANY ONE ELSE ☺☺☺☺
All Replies
Yes..brother. ..Ed has published new vids for Leshiy. ..accuracy test for all three Calibers. ….177 , .22 & .25
Plz watch them. …..
Magic! 😀
Magic! 😀
Ed…. plz don’t make the reticle like the MPR 12×44 reticle … this is not suitable for such short gun with short barrel. .. the quad selection for each mil on the reticle is quite suitable for the leshiy. .. the leshiy has got a short barrel and the bullet drop is more … i really prefer the MPR 10X44 reticle. … i can recognize the POI better with this reticle. …due the quad selection for each mil…. i hope you think of this before put it in the production. ..
I watched the vids of the leshiy. .. if you haven’t reset the turrets when you changed the barrels. ..then your Leshiy reminded me The Best 22LR rifle ….Sako Quad….my favorite. 22LR …. made from the country of Ville. ..
If the leshiy could gain this feature then this is the best you ever made….
Thanks
Ed picking a scope for your gun the Edgunbots of America and the World. One Shot One Gun One Scope
Guess it will be one less.scope to buy…
Hope it’s not a piece of shit…. :2:
I like the gun coming with a hard plastic case and the foam cutout to fit the gun. I don’t mind the gun coming with a scope, but I would prefer it to be a little higher in magnification. Probably somewhere between 7x and 10x I think would be ideal.
Ed,
my advice, drop the scope from the package and do the utmost to fit open-sights, this gun needs open-sights.
You dropped all the unnecessary bells and whistles and kept only the essential parts and this is very good but a gun without sights is missing an essential part.
I don’t know if you have ever seen a HW45 pistol but swapping barrel was made so easy and “fuxing” was practically impossible (ok I fuxed the screws once 😳 ). (I’m not comparing the pistol to your gun though).
As our friend PiterM says and before him a genius, not Steve J@bs but a real genius called Leonardo Da Vinci, “Simplicity is the ultimate sophistication” and this gun could be a testimonial of this.
Actually you could call the gun “Little Leonardo” in honor to one of the brightest minds human race has ever seen.
(Actually you have one thing in common with Leonardo Da Vinci and this is when you are saying “I, as usual, somewhat modest” 😀 )
:2cents:
The new leshy isn’t a gun that I will be jumping on the band wagon for . Why , first as far as I
know it is a single shot and is offered in the highest caliber of .25 . For a survival air gun for
me .25 cal. is too small of a caliber . A .30 caliber would be far more superior in being to take
down larger game for the sake of survival . I know that in this time that to depend on an air gun
for survival really does not exist , but if it did a .30 caliber would be better . I think that Ed came
up with this new gun and is playing on the emotions of those who would buy anything that he makes .
Secondly , to get the most money on the sell of this gun you are going to have to buy this gun with
with a scope that Ed says would be the best scope to use on this gun . That to me is like a whore
telling me what rubber I have to use of her choice to please her . Pure Bullshit . It is a nice looking
little compact air gun , but , all in all for the price he will be asking for it and he already has gotten
those who just seem to have to have one has let them know that they will not be cheap by any
standards due to milling costs . :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:
Ed no offense but I don’t want your scope. We have so many compact scopes for AR-15s here that I could choose from. I want the option of not buying a 5X fixed powered EDgun scope. Now if you make it a fixed 10X maybe… For the USA you should really make it optional.
Also where can I get the poster on your wall that shows the nails bowing to the hammer?
How loud is the foldED?
Is it capable to replace the barrel with a 12″ or 14″ barrel? which is considering a rifle.
Or like FX to replace the barrel with a arrow tube to shoot big game, real survival airgun.
More pictures of Leshiy, please.
Gun looks great with the scope, congrats :thumb:
Any concerns regarding dirt getting into the barrel, valve, folding mechanism while transporting?
Normally on PCPs (with few exceptions) when you bleed the cylinder while still attached to the action you bleed also the action, in this case, being action and cylinder detached, probably you need to bleed them separately? (Obviously only if you have to fux with the gun)
:2cents:
As for the dirt, the barrel is plugget with the pellet all the time — no problem. The hammer is quite tight inside its channal — don’t think there will be some problems. The wedge is spring-loaded, always in one position — no problem. The valve — there is a plenty of space to dirt doesn’t stuck inside. The air chanal, the worst thing can happen some dirt will fly behind the pellet, but just one time — don’t think that is a problem.
The filling probe whole will be lock with the sring-loaded balls — solved. The trigger mechanism — the trigger guard will be changed and there will not be any wholes, just the trigger out — solved. The hammer spring adjuster, will be completely covered, the only hexogen of adjusting screw will be out — solved.
I hate when he says that!
Btw, that tiny ass scope on the Leshiy is 4-20x? Is there a picture of the reticle available? Fortunately for those in the US, scope choices are plentiful. We just get gouged on the airgun prices in as a compromise.
You should really consider adding adjustable open-sights. Make the rear one attach to the rail as an optional piece. The front low profile on the end of the shroud before the threaded end cap with a piece of fiber-optic thread. There are picatanny rings available with a thru-hole. Sights would come in handy for quick and short engagements considering this is a walking/hunting gun. Example if your zero was 30 yds but you see something at 10 yards. It should be an easy shot with some practice. No need to mess with parallax or properly getting behind the scope.
Yes, at the IWA it was 4×20, now we are making our own scope 5×20, with the reticle like at EDgun scope 12×44, engraved on the glass not the wire reticle. In will be illuminated, 1/10 MIL closed turrets.
As for open sights. It was my first idea too, but I refused it as the line of sight is too high and I would need to make them very high which will not be good and comfortable. Just believe me I considered it seriously. Besides the accuracty of this little gun is over the open sights and I want my clients to get in in full extension.
No, it will be delivered wit the scope, take and shoot. Ask IPhone to sell you IPhone without a battery just because you “Know where to take better battery for low price!” 🙂
Negotiating the price is always good but would be good to hear the price first and the Chinese scope shouldn’t make a big difference (Actually having something “Proudly made in China” on a gun if not a dealbreaker at least should give you the right of a discount 😀 ).
The price will decide the classification of the gun between “Must have” and “Nice to have”, personally the more the price of those little buggers gets close to the price of a real gun (like a Matador, Cricket, Vulcan, Impact, etc, etc) the more the toy is pushed in direction “Nice to have” (IMHO)
:2cents:
:8: :8: :8:
Why do you want to ship that gun with a scope? Can’t you sell it without a scope and propose a lower price? I do not believe everyone will like that scope.
- You must be logged in to reply to this topic.
Great Keyser has already advertised this information! :thumb:
As ususally wouldn’t I know that he doesn’t have any part or interest I would suspect about his timeliness :D.