Kral Puncher Breaker bullup rewiew
Hi
It´s a little rewiew of a new bullup in the market.
All Replies
thank you
i do not have tested how many shot per fill
i refill every 15 shoot but i’m pretty sure i can shoot 5 more at full power (with NOE bullet)
Good stuff! I am really interested to see the changes you made to the valve vs the factory one. Could you go more in depth in details?
Hi Lee5.45
thank you
i do not have tested how many shot per fill
i refill every 15 shoot but i’m pretty sure i can shoot 5 more at full power (with NOE bullet)
be sure once i have 2 hours (and my scuba filled) i put a video for you
i put some pictures here of the work on rifle:
finished gun with silencer (next project is a full shroud
you can see the 16MM lw barrel
now the work on the air system:
the 4500 psi test:
the replacement of all air system with new fill and valve with lot of improvement:
the power selector with transfert port setted to 6mm
the trigger work and hammer work (thermal treatment)
concerning power with pellet i need to set as low as possible 1.640 grams pellets travels at 350 m/s and are totally unusable
2.2 grams pellets travels at 310 m/s and unusable too
noe bullet 52 grains travels at 270 m/s
i’m really happy with this rifle and concerning accuracy even with 17.7 twist (air gun barrel) unchocked i have lot of fun with it
next project is to put a 7mm barrel on it maybe (bergara barrel)
i put a video as soon i can
thanks for all
I work too on a .308 condor (estimated power 250, 300 fpe) dual air tank, bergara 7.62 barrel 26 inch 1/12 twist barrel
Thierry
Thanks for sharing! What is your shots per fill set at full power?
Hello all airgunner lover 😉
be sure once i have 2 hours (and my scuba filled) i put a video for you
i put some pictures here of the work on rifle:
finished gun with silencer (next project is a full shroud
you can see the 16MM lw barrel
now the work on the air system:
the 4500 psi test:
the replacement of all air system with new fill and valve with lot of improvement:
the power selector with transfert port setted to 6mm
the trigger work and hammer work (thermal treatment)
concerning power with pellet i need to set as low as possible 1.640 grams pellets travels at 350 m/s and are totally unusable
2.2 grams pellets travels at 310 m/s and unusable too
noe bullet 52 grains travels at 270 m/s
i’m really happy with this rifle and concerning accuracy even with 17.7 twist (air gun barrel) unchocked i have lot of fun with it
next project is to put a 7mm barrel on it maybe (bergara barrel)
i put a video as soon i can
thanks for all
I work too on a .308 condor (estimated power 250, 300 fpe) dual air tank, bergara 7.62 barrel 26 inch 1/12 twist barrel
Thierry
mag , sounds like you have a good gun , however , to me words are only words . It would be really nice if you
would show a video of your gun in action . Remember a picture is worth a thousand words .
FROM : THE BIRDMAN
i’m owner too of a kral puncher breaker (modded version)
i put on a LW .25 barrel 24″, totally rebuild air system, new valve, home made regulator, bullet load tray
air tube approved to 300 bar
i take near 100 fpe of it
i shoot noe bullet with it (pellet are too light now 😉
and for 1100 euros (very less than other brand without mod)
i can shoot a one euro piece at 100m and cut cord at 50 with it
even the hammer are changed but even with all modification the rifle cost me lot less than other and trust me now my kral can fight with all rifle in any category
Please do write a pictorial of all your work. Being new in the states and less time to mod it, we would love see the possibilities.
Hello all,
i’m owner too of a kral puncher breaker (modded version)
i put on a LW .25 barrel 24″, totally rebuild air system, new valve, home made regulator, bullet load tray
air tube approved to 300 bar
i take near 100 fpe of it
i shoot noe bullet with it (pellet are too light now 😉
and for 1100 euros (very less than other brand without mod)
i can shoot a one euro piece at 100m and cut cord at 50 with it
even the hammer are changed but even with all modification the rifle cost me lot less than other and trust me now my kral can fight with all rifle in any category
hatsan springer suck because there are too powerful … :whistle:
their pcp are not perfect but very good and accurate (lothar barrel for some of them)
i will never spend again more than 1000euro for a pcp!! now you can have good for a lot less…not perfect but high end are not perfect too…for example my fx 500 has some things that i don like:
no ambidextre
no quick fill protection
no magazine on the stock
no thread on the stock for bipod
for my i have open mind!!
lots of people are happy with their own hatsan and some others are not..same way with fx or other “high end brand”
if you look on the fx impact thread their gun has lots of problem and it s not a cheaper gun..leak,barrel not stay in place..so the price is not really an indicator about the reliability (cf vulcan gun)
In case you did not notice, my name is Cricket not Edgun fanboy :rofl:
I know about FX issues. I live in Sweden where they are made but I don’t own one still. I have never owned an Edgun in my life, I have owned a Hatsan springer and it was awful, that does not mean I did not have fun with it. But then I got serious about the sport and bought a reputational gun.
great for you if you are an edgun fan boy
for my i have open mind!!
lots of people are happy with their own hatsan and some others are not..same way with fx or other “high end brand”
if you look on the fx impact thread their gun has lots of problem and it s not a cheaper gun..leak,barrel not stay in place..so the price is not really an indicator about the reliability (cf vulcan gun)
I will happily read your owners review once you owned it for awhile, I would love to see your accuracy results at 50 and 75m. I would be glad to see some nice pics of the gun, make sure you take Good pics with nature background. But I will never own one or even consider purchasing one. Sorry.
so i forget to put this link
https://www.youtube.com/watch?v=uQN9AUBkolU
just because you have said earlier that this gun is not made by turkish(like all you bullshit )
so keep you false idea about this gun for you and stop to say bullshit
if you want to spend 1300usd for a pcp and trust that you will have a better one, it s great…
liked i ve said you, i am a owner of 3 pcp and it s not the most expansive which enjoyed me the best..bsa bucanner se cost only 340euro and i ca say you it make the job very well, good as my fx!!! :whistle: :whistle:
the trigger is not better but very good!the finish of the gun is well made..and for the rust i am lol….each gun rust if you don t clean them..or you buy alloy gun :rofl: :rofl: :rofl:
do you think that you edgun doesn t rust?????so it s magical steel gun…
the only difference is that one is made by hand so take more time and more money(like a ferrarri ..) than the others..i don t think you edgun brand has all cnc machine like a big factory could have
Tell Me, what barrels do these guns have? Home made?
+++++123456789….etc… i do agree with you…..
Never be able to persuade myself to buy a Turkish airgun … i have one rule in my life… don’t buy cheap items/tools … if you want to gain money ….
- You must be logged in to reply to this topic.
concerning valve the orginal valve weight is 12 grams, mine is less than 4 grams
the original valve is 12mm diameter, mine is 8.5 i have a gain of 35% on the valve work
the spring is less powerfull than original too and travel free on spring guide