Will FX spare airtubes fit Bobcat MK1
Just wondered, if anyone of you guys has tried or information on whether a current FX spare air tube (the one to be filled with their fill probe) would fit the MK1 Bobcat or whether they have used another thread / outlet valve so it wouldn’t fit?
Thanks in advance for any input.
All Replies
Viewing 5 replies - 1 through 5 (of 5 total)
Thank you, Ernest.
That’s what the guys from Luftvapen have just confirmed, as well.
Good to know, thank you all for your input!
That would by consequence mean, I could retrofit a regulator to this air tube, as it will be filled from the front side, not the foster fitting on the gun.
all FX AT has the same threads adapter,
like on the FX impact I can screw on a Ranchero, gladiator front tube, swift, all royale, WC, BC etc.
here is an FX Ranchero 50cc AT on the impact
http://www.MyEasyPics.com/is.php?i=1201695&img=donny.jpg
BP tuner
Good hint, thank you Cricket!
I would email these guys, they are swedes but so are FX. It’s worth a try anyway, they are the best when it comes to FX and if they don’t know they might contact FX themselves.
Viewing 5 replies - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
This is good to know, the foster fitting is in stupid place on the mk1 if you have large hands it’s difficult to release the fitting from the gun.