Aftermarket trigger for matador r3m
Is there any aftermarket trigger assembly or trigger sears for the matador r3m (2 screws)?
I tried to adjust the trigger to my liking and fuxed it up completely, more than it was factory fuxed up.
I’m not looking for OEM parts.
Thanks.
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Not sure because Ed made a few reditons to his trigger design.
This maybe a different version then yours but it might help a bit.
If you haven’t seen it already ?
……. also l’d do a seach here on the Edgun trigger tunes, inparticular to the readings of WingMan.
– Greg
Don’t think there’s an aftermarket trigger assembly for the Mat ……. IDK ?
The Matadors OEM trigger if done right tuned, can turn out to be a very fine excellent trigger !
Adjustment(s) need to be done very slowly and retested for each adjustment done.
I’d ask around here if someone can retuned/readjust yours for yah ………. at least back to OEM.
~ Greg
Back to OEM!
I’m adjusting my triggers since 35 years but decided to loctite the 2 screws and leave this “trigger” alone.
Thanks!
Sorry to hear that ……
Don’t think there’s an aftermarket trigger assembly for the Mat ……. IDK ?
The Matadors OEM trigger if done right tuned, can turn out to be a very fine excellent trigger !
Adjustment(s) need to be done very slowly and retested for each adjustment done.
I’d ask around here if someone can retuned/readjust yours for yah ………. at least back to OEM.
~ Greg
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Great info! Should have known, Ernest cured them all.
And I confirm, the “too screwed” (2 screws) trigger setup looks exactly like mine.