Visit Talon Tunes
Updated on January 13, 2018
jlb
Participant
January 13, 2018 at 6:23 pm
Q:

Edgun pressure guage

Well ladies & gents, pressure guage has given up the ghost after just 6 weeks or so. Needle seems to be sticking anywhere between 80 -150 bar, it appears fine above that pressure though :confusedn: I only noticed because I decided to run a full shot string through it. I have emptied it via the bleed screw pushed the valve open with a plastic tool still showing 80 bar. My question is where do I get a new one, spares seem quite difficult to source in the UK & the dealer I bought it from wants me to send it back to him so he can send it back to Edgun for a replacement under warranty, what a pain just for a guage & then without gun :sadn: Any idea’s would be appreciated.

John :smilen:

EdGun

All Replies

Viewing 7 replies - 1 through 7 (of 7 total)

kris
Participant
February 15, 2019 at 6:48 pm

yes Ed said contact the shop, he must be doing paragliding (too busy) :rofl:

jlb
Participant
January 20, 2018 at 10:14 am
quote kris:

quote JLB:

Well ladies & gents, pressure guage has given up the ghost after just 6 weeks or so. Needle seems to be sticking anywhere between 80 -150 bar, it appears fine above that pressure though :confusedn: I only noticed because I decided to run a full shot string through it. I have emptied it via the bleed screw pushed the valve open with a plastic tool still showing 80 bar. My question is where do I get a new one, spares seem quite difficult to source in the UK & the dealer I bought it from wants me to send it back to him so he can send it back to Edgun for a replacement under warranty, what a pain just for a guage & then without gun :sadn: Any idea’s would be appreciated.

John :smilen:

what is your experience with Edgun technical support

Didn’t know they had any. I thought it pretty poor service from the UK dealer given this gun is £1100 here. I will however now post the nackered guage back to them for a replacement. Needle is showing 95bar removed from the gun. I hope the digital one lasts longer.

John :smilen:

kris
Participant
January 19, 2018 at 9:47 pm
quote JLB:

Well ladies & gents, pressure guage has given up the ghost after just 6 weeks or so. Needle seems to be sticking anywhere between 80 -150 bar, it appears fine above that pressure though :confusedn: I only noticed because I decided to run a full shot string through it. I have emptied it via the bleed screw pushed the valve open with a plastic tool still showing 80 bar. My question is where do I get a new one, spares seem quite difficult to source in the UK & the dealer I bought it from wants me to send it back to him so he can send it back to Edgun for a replacement under warranty, what a pain just for a guage & then without gun :sadn: Any idea’s would be appreciated.

John :smilen:

what is your experience with Edgun technical support

jlb
Participant
January 19, 2018 at 7:10 pm
quote MEROU:

Hi John
You can go here too :
https://luchtbuks.com/nl/edgun-edmu-electronische-meet-unit
Joost have many of them
Mika

Thank you Mika, received today. Fantastic service from Luchtbuks.

John :smilen:

jlb
Participant
January 14, 2018 at 8:39 am

Thanks gents, it is much appreciated.

John :smilen:

merou
Participant
January 13, 2018 at 8:09 pm

Hi John
You can go here too :
https://luchtbuks.com/nl/edgun-edmu-electronische-meet-unit
Joost have many of them
Mika

Anonymous
Inactive
January 13, 2018 at 8:05 pm

https://edgunusa.com/spare-parts/19-pressure-gage.html

OR you can get the new Digital/Electronic one from Brian.
https://www.edgunwest.com/store/p89/EDgun__EDMU_%28Electronic_gauge%29.html

– Greg

Viewing 7 replies - 1 through 7 (of 7 total)

  • You must be logged in to reply to this topic.