impulse buy, 177 Kral B/P gun
Bought me a Kral Breaker B/P in 177, synthetic stock and sliver barrel ,
Found a super deal on a FFP Athlon 6×24 argos btr scope, Refurbished from PA for 300 bucks.
Bought the baffles and air stripper 35 bucks, Now I need to look for a regulator , I will take suggestions on that one……
I know, I know, I just should have bought a 177 Vulcan and been done with it,
Oh of course I had to restock on a few tins of JSB 177 pellets.
anyone else have on of these guns in 177, Please tell me I did not screw up to bad .
Mike
All Replies
The Gen 4 Black Vulcan is looking pretty,
Mike
Yup I have to agree I like the looks of the Vulcan gen4 also.
Miksatx
As you were posting I was boxing, I have my return number, Just waiting on the UPS shipping label,
Now I have a good scope, a tripod, Levels for scope, extra P rails , and a bunch of 177 pellets..
As soon as get my refund back to looking for a 177 bullpup , The Gen 4 Black Vulcan is looking pretty,
Mike
Thought you could send it back if ya didn’t like it?
OK, Well to day was take the stock off and adjust the trigger, WTF, No matter what you do there is no difference in the trigger, Unless you go to far clockwise and the gun will not cock? I did not see any way to make it lighter, Looks like I have to live with a 10 lb pull, :angrymob:
I finely ordered Marauder 177 baffles, I can not get nothing out of this Troy Hammer guy that I ordered the baffles and air stripper from, Does not answer phone or E mails,
I really need to get the baffles in this gun, Its just to dam loud , Or maybe my Crickets and Mutants have just spoiled me.
Why would anyone sale a gun with an empty barrel? I can live with the trigger, but not the sound of this gun, Hope my baffles fit and come in soon.
Mike
Greg
Thanks, I already seen it, But the barrel is empty, Nothing in it, Time I get a air stripper and baffles for it and then Donnys adapter then a fat boy if I can find one, Vulcan sure looking pretty, But got to work with what I got throw a little more money down the hole.
I think you have to give the Krals away, Not sure you can sell them, :rofl: :rofl:
I have the power wheel turned 1/2 way in the middle,
Mike
Donny makes an adapter Mike ……….
Kral Puncher Breaker 1/2 x 20 Adapter A8
~ Greg
:8: Sweet :5:
Got my Athlon 6×24 scope in high rings are in and still had to mount a high profile riser mount , I did install low profile rings on the one inch riser mount, Way cool my eyes go right to the scope no smashing my face to the gun,
Dam this thing is loud, I ask Troy Hammer to give me a tracking number on my air stripper and baffles that I ordered two weeks ago, No response.
Barrel is empty nothing in it , I am going to give this Troy guy another week , Then cancel, and order a 177 Marauder stripper and baffles I heard they fit??????????????
Sighted the gun back in 30 yards , Its just to dam loud to step out and do my 48 yard open range,
Still got to work on the trigger, Seems to like the 10.5 crosman premier pellets ,
This is one flat shooting gun , I have never shot 177 in a PCP , I am still impressed,
I got to get a picture of this scope sits pretty dam high but feels super good .
Mike
Well my scope came in but no rings, Installed my bug buster on it, Even with high one inch rings i still have to smash my face on the gun to shoot it,
Had to shoot on low power as my face will not go down for enough for nine power, Wind did not kick up yet, Got to stretch it out to 30 yards,
Five shots one hole with cheap crosman premier 10.5 gr pellets, I am impressed. Also impressed sounds like a 22 rimfire
I will get my Athlon 6×24 -50 FFP mounted Wednesday, Just in cast the high 30mm mounts do not do it, I ordered a riser for my P rail.
Trigger sucks But there is a way to adjust it, My fingers cramp up on me loading the little pellets in the 14 shot magazine, I knew they would…
I will have to shoot it through the chrony when I get it all ironed out .
Mike
OK, I got the gun today, Cleaned the barrel and it really needed it, Mounted my bug buster scope on the gun for now,
Scope will be in tomorrow, I did not have any 30mm picatinny tall rings, Had to order them, Well my bug buster will at least let me shoot it some.
50 mph winds tomorrow so I will be shooting on my back porch.
This 177 is LOUD!!!! Very loud and not at all back yard friendly, Got hold of Troy Hammer and my air stripper and baffles should be in next week.
The gun feels good in the hand and really not heavy at all, I think I am going to like this gun if it shoots good, and the baffles and air stripper takes the bark out of it, I really do not want to put a LDC on the gun and make it longer ,
If it does shoot good I will be looking for a regulator for it, The bottom picatinny rail is crap, Just spins around, I put one I had laying around works great,
I will take some test shots tomorrow and report back,
Mike
Got my supply of 177 pellets in today, Gun comes in tomorrow Tuesday , Looks like I can get it clean check it out because my scope comes in Wednesday, I do have mounts and a bug buster i could mount on it just to shoot it if I have time, I guess it depends on the brown truck.
Then again if the gun just plan sucks I can box it up and send back to PA for a full refund , Then save up for my Vulcan.
Or something else in 177.
I will post what I think about the gun for sure.
I ordered the air stripper and baffles from this Hammer guy, But have not heard nothing from him?
Mike
Seems like shooting C02 guns is not cheap, At least last time I owned one about 25 years ago.
Now if you can adapt a air tank on one that a different story, I am cheap ole guy,
P/A shipping goes mike this, Pellets come in this Monday, gun comes in Tuesday, scope comes in Wednesday , Not sure why they could not just put it all in one box,
About a 1000, bucks total so far gun scope pellets and extra doodads,
If i find a good regulator it will reach 1,100 easy,
So much for buying a cheap gun, :rofl: :rofl: :rofl:
Mike
I impulse bought a co2 replica Sig 320 20 shot semi auto blowback. It’s fun :4:
Ok Mike we won’t tell you…………..
- You must be logged in to reply to this topic.
Ok got most of my money back for the Kral, Troy sent me a refund for the baffle kit, Just got to eat the Marauder 177 baffles and spring,
Maybe they will fit something down the line.
Now the big wait for my Vulcan #2 in 177 to come in.
Mike