new deck bottle gun
disco based Magnum airgun 15.5 tube cut to 10 1/4″. stuffed with magnums new hot disco valve and huma reg with plenum. added my old disco single shot breech and 24″ barrel homemade ldc. prod trigger group, with made up other crap for stock. shooting .177 jsb 10.3 930 fps. oh .004 clearance between bottle and barrel. Dropped reg to 90 bar shooting 10.3 880fps.
All Replies
Nevermind- I re-read your post…
Wait- is the bottle adapter crooked, or the reg? Or did you mean the reservoir adapter to the reg?
That’s disgusting. I’m not a hardcore yard guy, but that’s just disgusting. :angrymob:
New bearings for the head stock
All metal gears
16″ bed conversion
Quick change tool post
My micro mill (Sieg X1) will also be upgraded:
Larger table
Column spacer to both be able to use the larger table and to get some more z-axis height
Belt-drive conversion
I can’t wait to get everything done and trammed in!!
That’s great! I’d like to setup a small garage shop. But not where I live now. I’ve got a next door neighbor that hasn’t cut his backyard in 3yrs.
Decided not to send back for refund. I’ll just have another adaptor made. And never deal with the seller again.
Too true my friend!! My mini shop will hopefully be up and running within the next six months or so… I’m also going to be piecing together my reloading bench. Hence the slow setup time. The mini lathe will be getting upgraded from the get-go:
New bearings for the head stock
All metal gears
16″ bed conversion
Quick change tool post
My micro mill (Sieg X1) will also be upgraded:
Larger table
Column spacer to both be able to use the larger table and to get some more z-axis height
Belt-drive conversion
I can’t wait to get everything done and trammed in!!
Getting a lathe good idea. You can make your own tps lol. Just lots of stuff you can do with a lathe.
It’s head back to China and I’m hoping for a refund.
Holy shit that’s bad… I don’t think even I could machine threads that poorly, and I’ve only JUST received my lathe. I also have no experience machining threads. Damn. I hope everything is corrected soon!
Got the tank yesterday looked real nice. BUT the top piece the regulator screws into the threads are not cut parallel to the threads cut on the outside of the piece. So as you screw the tank in the drop down it wobbles as you screw it in. And looks like crap. I put in for a return of product and the return address is partly in Chinese and partly English. Lol the English part no problem the Chinese writing big problem.
Post about it when you’re done!!
I ordered one. Really close to the same size of the pp700 tank. Both 32mm dia x 7 3/4″ long this one 300 bar fill pressure wowzer!!
Now THAT’S kinda interesting!! 😈
- You must be logged in to reply to this topic.
Couple quick shots over the fence.