Mutant standard factory shroud replacement
Well i am thinking of performing the magic hoot hole shroud modification but am worried about screwing something up… anyone out there know of a good place to get a replacement mutant standard shroud that i can port and see if i like it better sound wise.
Like in this thread….
http://www.talonairgun.com/forum/viewtopic.php?f=55&t=35595
Thanks
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
You’re welcome :8: Think DonnyFL’s line of LDCs. A very popular add for this gun.
Darryl
PS I forgot to mention that no one had replacement shrouds for my Short; a thing which might have swayed me from drilling mine. Maybe that has changed, but I don’t know. It would seem to be a spare part, but…???????????????? So if you like to tinker, be sure you have a spare lined up, and if you find one, please let me know. :tag:
Thank you!
Don’t do it. I looked into a new shroud after I drilled mine. Save yourself a lot of grief from failure. :sadn: Now I have black tape over the holes. Had I discovered decreased noise from the drilling, I’d have posted it. BTW, so guys filled their holes in, and used a black magic marker (unless I was dreaming).
Darryl
PS ymmv; someone in that post claimed a reduced db level but also included with the holes was some sort of quieting material. I never added such material, to be clear.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Back porting can be a double-edged sword if not done/placed right.
Often owners experience a reduction and be not aware that the suppression is occurring being at the muzzle end only and on the shooter side became more pronounced.
So for me I’m cautious with this and it seem by adding a removable Donnydu TATSU @ only 4.25″ long would be a wiser choice.
~ Greg