Fill adaptor doesn’t fit on my fill station…
I recently ordered a new Talon SS and along with it, a 1/4 male bottle adapter. I didn’t order the whole clamp because I have another clamp from my paintball days that I just figured it would screw into. Well, turns out I was wrong. The paintball clamp has a 1/8 hole, and the Airforce adapter has a 1/4 inch male adapter. Is there a part I can buy, either at a hardware store or online, that will allow me to connect the Airforce adapter to my old clamp, or will I just need to bit the bullet and buy the adapter? It seems to me that something like this would work:
http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=303
Thanks in advance for your help,
Chris
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
got your pm, sent out adapter today you should receive thursday.
should be able to get a 1/8npt male / 1/4npt female adapter at your local hardware store for a couple bucks. If not PM me, I beleive I have an extra tank fill adapter with the 1/8 thread that you need; will send it to you if you will reimburse shipping.
Edit, just checked my tank adapters…..the 1/8 and 1/4 are both BSP not NPT (straight thread vs. tapered) I do have the adapter you need to reduce the 1/4″ af bottle adapter to 1/8″. PM me your address and I will send it out to you on Monday, no charge. Thank your neighbor DaveD, as he sent me a heavy hammer he was not using and asked nothing in return. Glad to help a fellow enthusiast where I can.
The part that fits onto the 1/4″ adaptor is a 1/8th adaptor. The 1/8th’s height is just shy of 1″ and 2/8ths.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Excellent! Thank you very much.
Chris