50 fpe with 17 "barrel .25
Hi,
did make a new valve and shoot now Baracuda’s with 50 fpe with a 17″barrel.
How will be the power with a 24″barrel, a bit more??
Thanks for response in advance.
Pic : valve without vent holes.
[/img]
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Thx for the info,
that will give 62.8 fpe, is 85 Joule not bad, did make it for a TAG member, i hope it’s good for him.
I only shoot 30 ft/lbs, good for me, and bad for the rabbits at 100 yards 😉
I keep seeing aprox. 15 FPS per inch of Bbl. posted here.
did make a new valve and shoot now Baracuda’s with 50 fpe with a 17″barrel.
How will be the power with a 24″barrel, a bit more??
Thanks for response in advance.
Pic : valve without vent holes.
[/img]
Very nice looking valve. I am also working on an adaptor & being newbie I would highly appreciate if you can you show all the componants from different profiles. Such as front, top, back etc. to have a through understanding.
Thanks
Karizman
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
see here
http://talonairgun.com/forum/viewtopic.php?t=2705&highlight=strange
and send me you e.mail address with a PM, then i send you the drawing of the valvehouse.