New TOY Steyr LG 110 30 ft/lbs
After buying some old stuff, now a hi tech one.
Must do some work on it, and the barrel is a bit long,
Did cut today a 1/2 UNF on the muzzle it was a “bit “loud.
[/img]
All Replies
Hi here a pic. of the hammers.
The top hammer is adj. with the stock on the rifle.
Down de pic. is the Hammer with the High Power spring.
drawings / expl. view you can fing in your booklet or on the site :
http://www.steyr-sportwaffen.at/index.php/en
Lets go:
TO open the rifle.
You need Metric hex keys.
First unscrew the bottle from the rifle.
unscrew the small hex screw Part No. 116 in front of the trigger.
unscrew big bolt PN 185 in stock.
unscrew nut PN 28 on the back of the hammer spring, so you can takeout the hammer spring ,
take care of the small washer between nut and spring, ( if you want to fit a drinking straw.)
Unscrew the transferport PN 55 ( where the green o ring is fit ) with a good fit, hex key, ( need sometimes a bit of force ).
unscrew two M4 bolts PN 173 , and push out crossbar PN 33, to take out plastic endcap PN 117, ( cock the rifle to push the endcap out. )
If you want take out the hammer you must take out lever PN 3, you must lift washer 36,
take care of the small spring in the lever.
So you can take the rifle in two parts, you van see the air inlet, where you screw normal the bottle on.
There is a nut with two holes in it, put some small drills it it, and put square a screwdriver, or hex key between them,
and unscrew the nut ( anti clock wise) behind the screw is a small metal woven filter,
take it out with a small needle, behind that is the regulator screw, give it a half turn to see what’s happen, I don’t know if the pressure going up or down, it was to long a go, when I was working on the rifle.
good luck.
reg adjustment screw needs very little turning …..clockwise 1\4 turn at a time will decrease velocity.
Thank you very much Ewoodie.
Here some info about the regulator.
drawings / expl. view you can fing in your booklet or on the site :
http://www.steyr-sportwaffen.at/index.php/en
Lets go:
TO open the rifle.
You need Metric hex keys.
First unscrew the bottle from the rifle.
unscrew the small hex screw Part No. 116 in front of the trigger.
unscrew big bolt PN 185 in stock.
unscrew nut PN 28 on the back of the hammer spring, so you can takeout the hammer spring ,
take care of the small washer between nut and spring, ( if you want to fit a drinking straw.)
Unscrew the transferport PN 55 ( where the green o ring is fit ) with a good fit, hex key, ( need sometimes a bit of force ).
unscrew two M4 bolts PN 173 , and push out crossbar PN 33, to take out plastic endcap PN 117, ( cock the rifle to push the endcap out. )
If you want take out the hammer you must take out lever PN 3, you must lift washer 36,
take care of the small spring in the lever.
So you can take the rifle in two parts, you van see the air inlet, where you screw normal the bottle on.
There is a nut with two holes in it, put some small drills it it, and put square a screwdriver, or hex key between them,
and unscrew the nut ( anti clock wise) behind the screw is a small metal woven filter,
take it out with a small needle, behind that is the regulator screw, give it a half turn to see what’s happen, I don’t know if the pressure going up or down, it was to long a go, when I was working on the rifle.
good luck.
since I do NOT want to cut a 1\2″UNF on the end of these barrels.
WHY not??
I allways make 1/2 unf on my barrels, don’t like the adapter stuff.
The stuff that you buy don’t have most of the time a proper fit.
When I make an Adapter I try to make it one to one for a very tight fit.
I just received 2 of the new LG110 Hunters in .20 …unfortunately the barrels are 16.18mm OD and none of my slip-on silencers and adapters fit…will have to make a plan since I do NOT want to cut a 1\2″UNF on the end of these barrels.
If you dont mind can you please also send me this doc. that you have saying how to do the replacement of the spring for FT?
Thanks Man i hope HOLAND can make the WORLD CUP!
:18 :18 :18 :18
Thank you Ewoodie , waiting..
Hi,
I have a doc. on my job, how to do it, will you send you more info next week.
Hi Ewoodie,
I bought a Steyr LG110 HP Hunting .22 and I’m looking forward my gun.Also an extra FT spring will come with my gun.I guess HP’s have about 25 shots per fill.It means too much air waste and I’m afraid this might be created accuracy problem .Can you advice how to change the regulator output pressure.Is it easy to tweak the regulator and change the hammer spring? Do you have videos or pictures how to do it.
And do you know the capacity of air tube of the gun?
Thanks
Hi,
NO my rifle has a closed stock, Only it has a drinking stroo around the hammer spring, from the factory they have a very bad “twang”
Tweaked reg. with FT spring give more shots
the best there is for rifles < 40 ft/lbs, cost around $ 60.
I need you to do me a favor, can you tell me if your gun has this YELLOW POWER AJUSTER?
http://i985.photobucket.com/albums/ae337/DuduCondor/GetAttachmentaspx.jpg?t=1278480617
THANKS FOR YOU HELP!
Sorry little late but the shourd is a Weihrauch 1/2 UNF air rifle silencer.
the best there is for rifles < 40 ft/lbs, cost around $ 60.
Nice shootn!!!
- You must be logged in to reply to this topic.
The top hammer is adj. with the stock on the rifle.
Down de pic. is the Hammer with the High Power spring.
Hi, ewoodie, i have been trying to get a High Power spring and hammer for my steyr, but my gun is not official uk import so am struggling? do you have a contact that i could buy this item from. . . cheers kev 07809 738346