High Flow condor tank
Would someone explain to me what the difference a condor high flow tank would do to a talon ss. Are they a direct fit to a SS?
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Here’s a question from a different angle (although i’m sure its been asked before) What would be the result of a .22 cal. 24″ barreled condor shooting 21.1 gr. Kodiaks using a talon tank? What about the same set up using a micro-meter tank?
Been through a lot of hammers and back to stock with some modifications. Personally don’t see an advantage to a heavy hammer because it narrows the power range to heavy shots.
More power usually fewer shots.
High flow tank with 12″ barrel is OK but you get fewer shots. That said I get well over 50 fpe using 12″ barrel and heavy pellets.
All depends upon what you like. If you want more shots at power you can put in longer barrels.
If you can get by with less power turn in your top hat all the way in and you’ll get more shots or you can get a micro flow value or you could consider CO2 conversion.
Good luck
I wanted to put one and get a heavy hammer but was hoping for more shots with the same power. Is this possible? If so would I be able to use the stock tank with the heavy hammer?
That depends on the pellet and PW setting and Tophat as well as tank PSI.
But the High Flow tank gives a lot more power with less shots.
What are the differences in fps from stock to high flow.
To use a Condor High FLow tank on your Talon SS you need to get a hammer wieght from AF and then you can screw your Condor tank directly into your Talon.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
I have a lot of info about different barrel lenths, Tanks and calibers..
I have to find the time to post it all…
2900 psi fill. Standard tank.
Talon .22 24″ barrel.
Kodiak @ 875 fps
Jsb Exact @ 930 fps.
I would knock off 150-200 fps with a Mico tank.