Some Air Force design changes

I recently received some new parts from AF.

Along with the usual and well known additional set screw to hold in the bottle collar and the 2 extra set screws to secure the frame bushings I noticed some extra changes.

Top rail is thicker –

The breech has three slots cut into it instead of just 1 that was to provide clearance for the sear… Not sure about the reasoning on this one.

And I guess they must have got sick of people calling and asking what that piece of tape does…

Mods/Machinists

All Replies

Viewing 6 replies - 1 through 6 (of 6 total)

love-my-talon-ss

Participant

November 7, 2008 at 12:50 am

quote Yellow Ninja:

I’m going to call and ask for a copy of the parts list to be emailed or faxed to me along with a price list.

Sticky it please. 😀

yellow-ninja

Participant

November 7, 2008 at 12:49 am

I’m going to call and ask for a copy of the parts list to be emailed or faxed to me along with a price list.

voltar-1

Participant

November 6, 2008 at 10:48 pm

Thanks Yellow!
May need to buy a frame for a project gun 🙂
Condor frame and CO2 adapter would be sweet.
BTW do they have a parts list somewhere to order from?

Thanks again
Walter…

Participant

November 6, 2008 at 9:50 pm

Yes Walter – $100 for the condor frame, not sure if the talon frame costs the same.

Shrp – that must be it, but I didn’t know the edge had a slot on both sides so was confused why it had three and not just two cut outs. I might try and make something to glue into those cut puts to act as a hammer slap mod.

voltar-1

Participant

November 6, 2008 at 9:15 pm

YN, are you able to get a frame from Airforce?

Changes look good and about time 🙂

Walter….

shrpshotr28

Participant

November 6, 2008 at 8:07 pm

notches on the breech are so they can use the same part in the Edge, with it’s ambi side cocking option.

Viewing 6 replies - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.