Visit Talon Tunes
Updated on September 19, 2007
px4ec
Participant
September 19, 2007 at 8:28 pm
Q:

TalonSS velocity

What is the maximum velocity can a stock talonSS go to? I do not have instrument to measure the velocity. But the spec say’s it could go from 400-1000.

I would like to have a constant 1000 fps if possible. What kind of pellet should I use to achieve this velocity? Do I need to do mods to my current hammer and tank? Any info and help is appreciated.

Thanks in advance.

Talon/Talon SS

All Replies

Viewing 7 replies - 1 through 7 (of 7 total)

joe-from-wv
Participant
September 21, 2007 at 8:55 pm

How many accurate shot on a 22 do you get on a Condor on a fill anf how many do you get on a 22 Talon on a fill.

walkonking
Participant
September 20, 2007 at 5:07 am

PX,

An 18″ barrel will increase your velocity a lot over the 12″. If you got a Condor Valve it will definitly increase your velocity. And they are only $105 from airforce

px4ec
Participant
September 20, 2007 at 4:53 am
quote Adam in SoCal:

quote PX4EC:

What to do to get the max out of a 12″ barrel to shot at 900fps?

On a 3000psi fill I get 850 fps with CP and 750 fps with Kodiaks. PW set at 4. I modified the valve and was getting the same numbers with a 2500 psi. I need to get my scuba filled to see what it can do at 3000psi.

I am getting a custom 16″ .22 barrel from Tony and that will kick up the velocity.

I’m planning on getting an 18″ barrel in 22cal. Will this help get the fps or will slow it more?

I apologize for all newbie questions. I’m just getting in to this hobby. I might need to learn more. 🙂

walkonking
Participant
September 20, 2007 at 4:28 am
quote PX4EC:

What to do to get the max out of a 12″ barrel to shot at 900fps?

On a 3000psi fill I get 850 fps with CP and 750 fps with Kodiaks. PW set at 4. I modified the valve and was getting the same numbers with a 2500 psi. I need to get my scuba filled to see what it can do at 3000psi.

I am getting a custom 16″ .22 barrel from Tony and that will kick up the velocity.

px4ec
Participant
September 20, 2007 at 4:20 am

What to do to get the max out of a 12″ barrel to shot at 900fps?

badcompne
Participant
September 20, 2007 at 12:08 am

T’s right….when my TSS was stock, it was getting about 775fps with JSB’s and a pw setting of 10. With a 18″ barrel and JSB’s, (same pw setting) it was getting an average of about 850fps. Both these were run at a fill of 3000psi with the stock hammer. A heavier hammer with an agressive tophat setting can boost these numbers a bit. I now have a 24″ lw .20 cal barrel on it and its pushing eujins at about 960fps for almost 49fpe.

anthony266
Keymaster
September 19, 2007 at 10:32 pm

Hey Px,
You are not going to hit 1000 with a 12″ barrel…IIRC you will get in 900’s with Crossman Premiere’s at 14.3gr in .22

Viewing 7 replies - 1 through 7 (of 7 total)

  • You must be logged in to reply to this topic.

4 Comments