Connecting a Hill Pump to a AF Bottle
Very frustrating.
Pump was purchased used. It has the flexible line on it, which I assume is original. Can someone tell me what I need? I have a 1/8 BSPP (?) adapter and it doesn’t want to work. I don’t want to order and wait for more stuff I won’t be able to use.
(I know this is probably a repeat topic but search didn’t find me any posts that included an answer 😕 )
Thanks!
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
mmmmmmm mmmmmm
yep that’s the way to do it, Mac-1 took my AF adaptor and milled to a foster fitting, put a braided line on the hand pump with a foster,rigged the scuba the same, also put a foster on my logun fill adapter as well.
This way you are good to go, get a different gun and adapt to foster as well.
Universal adaptage, that’s what it is!!!!!!
I have the same setup (hill pump and airforce talon ss) and just called tim at mac1airguns. he was able to provide all the required pieces and modify my existing adapter to have a foster. Very reasonable priced and very fast service.
Martin D. White
IIWY
I would hook it up like this but to the pump.
Mac1 can get you set up
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
If you haven’t figured it out yet…Take the hose off the pump and screw in the 1/4 to 1/8 adapter that you bought and the AF pump fill adapter will fit into that…It will work until you find something else…i am just going to leave mine the way it is…….
